Manualshelf

Installation Sheet

ManualsBrandsCrystorama Lighting Group ManualsChandeliersZucca 6 Light 43" Wide Taper Candle Chandelier
12
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL# ZUC-A9037-EB-GA
All electrical components must be installed by a
licensed electrician in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 6–Candelabra
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install:
1. Place the Candle Sleeve 3) over the Socket (4) then Install the
bulb (2) to the Socket (4).
2. Measure the distance between two mounting holes on the
mounting plate and drill the two holes in the ceilings surface
based on that distance. Insert the plastic anchors into the holes.
3. Place the mounting plate over Junction box securing it with the
machine screw. For extra securement, insert the wood screws
into the plastic anchors pre-buried in the wall and tighten it.
4. Raise the Frame (1) to the ceiling and hook the safety cable onto
the Canopy. Now the Lighting Fixture is supported by the safety
cable.
5.
Attach the Frame (1) onto the ceiling by securing the canopy into
the mounting plate, using the screws.
lntertek
CM
US
C
22"
42.5"
Frame (1)
Bulb (Not
included) (2)
Candle Sleeve (3)
Socket (4)
12.75"
42.5"
Drawing (1)

Summary of content (2 pages)