Datasheet

Document NO.: WI-FHF- CS-PME2SL -A
Page 5of 9
MODEL: CS-PME2SL
REV : A/2
Date : 18 Aug 2015
3.Test (测试)
3.1 Testing Environment（测试条件）:
3.1.1 Test time should be no more than one month after receive the battery
测试电池为用户收到后不超过 1 个月的产品.
3.1.2 Testing Environment(测试环境):
Temperature(温度) : 15℃--25℃
Relative Humidity(相对湿度) : 45%--85%
Atmospheric Pressure(大气压力) : 76kPa--106kPa
3.2 Testing Instrument(测试工具):
3.2.1 Voltage meter 0.5 grade or more regulated by IEC 51/IEC 485, more than 10KΩ/V
internal resistance
电压计 IEC 51/IEC 485 所规定的 0.5 级或以上, 内阻大于 10KΩ/V
3.2.2 Current meter 0.5 grade or more regulated by IEC 51/IEC 485, include wire
resistance less than 0.01Ω.
电流计 IEC 51/IEC 485 所规定的 0.5 级或以上, 包括引线总电阻小于 0.01Ω.
3.2.3 Calipers Definition 0.02mm
卡尺 精确度 0.02mm
3.2.4 Internal Resistance Meter AC 1KHz 4 terminal measure setting.
内阻仪 交流 1KHz 4 端子测量装置.
3.2.5 Load Resistance Include external circuitry, allowed resistance figure error is ±5%.
负载电阻 包括外部线路,电阻值允许误差为±5%.
3.2.6 Finished Battery Product Testing Machine
成品电池测试仪