Pollak® A Stoneridge Company worldwide engineered solutions to design challenges Catalog MC-612
Pollak® A Stoneridge Company Since 1909, Pollak® has provided the transportation industry with innovative designs, reliable manufacturing, high quality standards, competitive pricing and low life cycle costs.
ELECTRICAL CONTROLS CONNECTORS/ ADAPTERS For senior design engineers at major OEM’s, the operator of a heavy duty truck or the weekend camper, the name Pollak® has always symbolized technology and quality. As a Stoneridge Company, Pollak continues the tradition today.
ALPHABETICAL INDEX (See Numerical Index, pages 66-67) Adapters Adaptor Housing, Connector Alarms, Back-up Anti-Restart Ignition Switches Axle Switches Back-up Alarms and Switches Back-up Lamp Switches (Ball Operated) Battery Disconnect Switches Battery Jumper Terminals Boot Nut, Starter Switch Brackets, Connector Buzzer Circuit Breakers Circuit Breakers Brackets Circuit Breakers Sockets Circuit Breakers Junction Box Connector Hardware Kits Connectors, Molded Connectors, Trailer Dimmer Switches Displays (Me
CONNECTORS & ADAPTERS 5
7-POLE PLUGS SOLID BRASS PINS HOUSING AVAILABLE IN ZINC DIE-CAST OR GLASS FILLED NYLON INTEGRAL LEAF SPRING MOISTURE RESISTANT WEATHER-BEATER SEAL CONVENIENT HANG RING PROTECTIVE GREASE ADDED SOLID HIGH IMPACT CYCOLAC CONTACT RETAINER CABLE LOCK PLATED STEEL RETAINER SCREW ZINC DIE-CAST 11-902 Weather-Beater Plug with Cable Guard 11-702 Standard 7-Pole Plug with Cable Guard HIGH STRENGTH CLOSE COILED ZINC PLATED SPRING STEEL CABLE GUARD GLASS FILLED NYLON 11-910 WeatherBeater Plug with Cable Guard
-POLE SOCKETS Meets and exceeds all standards of SAEJ560 (SAE applies only to solid pins) Floating pins for ease of alignment and maximum contact. Optimum slant mount and drain slot rid housing interior of accumulated moisture. Will accept the widest range of gauges from #16 wires to #8 ground wire. Ground Terminal Pin #1 will accept #14 gauge min. to #8 gauge max. Other terminals will accept #16 gauge min. to #10 gauge max. 40 Amps continuous duty @ 6-28 VDC. Self grounded.
7-POLE SOCKETS ZINC DIE-CAST BODY & COVER DURABLE THERMOSET PLASTIC BASE VIEW – REAR OF SOCKET SLOTTED GALVANIZED STEEL SET SCREWS ENCLOSED STAINLESS STEEL SPRING DRAIN SLOT IN COVER EXTENDED LIP FOR PLUG SUPPORT SOLID BRASS PINS NEOPRENE RUBBER WEATHER RESISTANT BOOT RING TERMINATION STYLE SOCKETS BULLET TERMINATION STYLE SOCKETS 11-785 Same as 11-720 except with rear threaded terminals for ring terminals. Solid Pins. 11-786 Bullet-Style solid brass terminals for push-on terminals.
7-POLE SOCKETS WITH REPLACEABLE CIRCUIT BREAKERS Base plate and back plate made from rugged glass filled nylon to resist breaking. Bottom lip has been extended to allow for better plug and cable support. Drain hole has been incorporated into the housing to allow accumulated moisture to escape. Will accept the widest range of wire gauges from #14 wire to #8 ground wire. Will accept all plugs conforming to SAE J560 specifications. Ground may be tied to any screw mounting the rear terminal plate.
6-POLE CONNECTORS 6-POLE SOCKET Number Color Circuits GD White Ground Return TM Brown Tail Lights LT Yellow Left Turn S Red Stop and/or Electric Brake RT Green Right Turn A Blue Auxiliary Circuit (Center) (Auxiliary in center) Complete Assemblies (Plug and Socket) Part No Plug Socket 11-600 11-604 11-607 11-602 11-604 11-608 11-603 11-604 11-609 11-603 Assembly incorporates concealed terminals on socket side for exterior mounting.
4 & 5-POLE CONNECTORS 4-POLE SOCKET 5-POLE SOCKET 4-POLE POS 5-POLE POS Color Circuits W 1 White Ground Return G 5 Green Right Turn & Brake Lights 3 Yellow or 4 Red 2 Brown 4-POLE PLUG Y/R B 5-POLE PLUG Left Turn & Brake Lights Tail Lights 4-POLE CONNECTORS - 12-24 Volts, 35 Amp. Zinc Die-Cast 4-pole unit incorporates many Interchangeable with competitive brands. new and improved features. Extended exterior and socket conceals 11-402 terminals.
SINGLE POLE CONNNECTORS Corrosion resistant plating 4.12 REF. .70 3.44 Integral Cable Clamp Ground lug accepts #2-gauge or #4-gauge wire 1.65 DIA Slotted mounting holes on receptacle for ease of assembly Terminal pin suitable for #00-gauge wire This rugged Single-pole Connector has a continuous duty capacity of 300 amps, and is ideal for many power applications on trucks, agricultural equipment, utility vehicles, winches, light air-craft ground equipment, etc.
CONNECTOR ASSEMBLIES 12-24 Volts 20 Amp. Polarized design with high impact interior and split brass contacts for a perfect fit to ensure maximum current carrying capacity. Outer sleeves are unaffected by ozone or weather. Car End Trailer End 11-405 4-Pole Complete Assembly 12-24 Volts, 20 Amp Trailer End Car End 11-200 2-Pole Complete Assembly 12-24 Volts, 20 Amp AUTOMOTIVE, MARINE, RECREATIONAL VEHICLES, TRUCKS 12 Volts, 15 Amps.
7-Pole RV Style Socket 11-893 - RV Socket 12V, 30 Amps 12-711U Mounting Bracket 11-998 Interlocking mating connector to the 11-893 Socket and 4’ Harness. Pollak‘s® sealed RV socket is designed to be dependable in one of the harshest mounting environments for an electrical device - an exposed external mounting under the rear bumper of a sport utility or pickup truck. This connector design continues to earn the distinction of becoming the industry standard.
7-POLE CONNECTOR 12-705 Series (7-Pole Set) Black Pollak® Plastic 12-705 Complete Set (12-707 and 12-706) 12-706 Trailer-End Only Plug 12-707 Car-End Only Socket 12-709 12-705 Plug & Socket with 12-711U Bracket 12-712 12-707 with a 12-711U Bracket Plastic connector set eliminates rusting, poor appearance and difficulty in plug removal. Design offers dual grips for ease of plug removal from socket and incorporates vinyl inserts to keep out dirt and moisture.
Trailer Tow Accessories TRAILER WIRING TIPS Avoid splices wherever possible * Establish a solid electrical ground * Maintain clean and weatherproof wire connections * Make sure that the various wires and harnesses are free of stress and are not dragging or likely to be snagged * 12-717 Connector Adaptor (6-Pole to 4-Pole) Converts 6-Pole Round Connector to a 4-Pole molded connector. Quick and easy to connect. Non-corrosive nylon shell and insert. Eliminates makeshift jumpers.
Trailer Tow Accessories Adapters 7 Way Pin Plug to 12-724 7 Way RV Type Socket 12-411 4 Way Pin Plug to 4 Way Flat Flex Adapter 6 Way Round Plug to 12-725 7 Way RV Type Socket 12-611 6 Way Round Male to 4 Way Flat Female Flex Adapter 4 Way Flat Plug to 12-610 6 Way Round Metal Socket 12-723 4 Way Flat Plug to 7 Way RV Type Socket 12-625 12-726 4 Way Flat Plug to 7 Way Round Metal Socket 6 Way Round Plug to 5 Way Flat Adapter 12-742 7 Way Pin Plug to 4 Way Flat Adapter 12-727: Nylon 7 way RV pl
SWITCHES
SWITCHES Custom Designed Toggle Available with Chrome Plated or Black Matte Finish 50 AMPS 6-24 VOLT TOGGLE SWITCHES Pollak® Toggle Switches designed for many high-current applications. Oversized internal copper contacts will carry up to 50 AMP current loads. Provides the longest possible service life. (Note: Quick-Connect Blade terminals will carry 30 AMPS.) Aluminum Knurled Face Nut Nickel Plated Hex Nut Rugged Glass Filled Nylon Slide and DieCast Body Copper Contact Bridge .
SWITCHES A complete selection of circuitry configurations for Truck, Off-Road, Automotive and Recreational Vehicle applications. Provides durable and long lasting solutions to new and replacement requirements. 20 Amps @ 12 VDC. Part No. No. of Terminals Circuitry Terminal Type Handle Length Handle Type Notes S.P.S.T ( SINGLE POLE – SINGLE THROW ) 33-302 On-Off 2 Screw Std. 11/16” Chrome 34-571 On-Off 2 Screw Std. 11/16” Chrome 34-571Q On-Off 2 Blade Std.
ACCESSORIES The best combination of space-saving size and economy. Universal for Automotive, Light Truck, Off-Road and Recreational vehicles. Furnished with mounting hardware. 33-300 2 Position Toggle Switch, On-Off 6 Volt-35 Amps 12 Volt-20 Amps Brass construction. Screw terminals. Toggle and Face Nut CHROME PLATED, Mounting Stem 3/8" Long, 7/16" diameter 34-500 2 Position Toggle Switch, 20 Amps @ 12 VDC, S.P.S.T. Knurled Face Nut Indicator Plate, Back Nut and Terminal Screws assembled.
SWITCHES SEALED ILLUMINATED ROCKER SWITCHES Designed for complete protection against dust and moisture. Rated 20 Amps at 12 VDC. Features include black plastic housing, nylon bezel, silver contacts, white lens 34-230 (Shown) with LED bulb, and .250’ quick connect terminals. May be used with Pollak’s new single and modular mounting brackets. (Panel cut-out dimension: .83 “ W x 1.45” H) 34-230 On-Off, S.P.S.T 34-236 Mom. On-Off-Mom. On, S.P.D.T. 34-231 Mom. On-Off, S.P.S.T. 34-237 On-On, D.
D.P.D.T. (Double Pole/Double Throw) A six terminal switch that controls two double wire circuits permitting only one circuit to be energized at a time, or four single wire circuits permitting only two circuits to be energized at a time. S.P.S.T, (Single Pole/Single Throw) A two terminal switch which opens or closes one circuit.
SWITCHES - PUSH-PULL .88 DIA .66 2.12 1.44 35-331 35-306 ..56 35-330 35-316 35-306 6-28 VOLTS - 75 AMP D.C. 2 POSITION S.P.S.T. OFF-ON Die-Cast Body, CHROME PLATED, Knob, Copper Terminals, Mounting Stem 5/8” long, 15/32” Diameter 35-300 35-331 Same as 35-306 with Red Metal Knob 52-642 Mating Connector 35-320 35-330 Same at 35-306 with Black Metal Knob 35-319 Same at 35-306 except the hardware is assembled on the switch. 35-316 3 POSITION 12V OFF-ON-ON Combination Rheostat, Panel and Headlight.
SWITCHES BOOT NUT ASSEMBLIES WEATHER and DUSTPROOF Neoprene rubber type Boot Nut Assemblies. With 5/8-32 thread, Can be used on #52-611 and #33-200 and on other Momentary Switches with this Mounting Stem 25-372 Protective Collar - Safety Bezel with 5/8"-32 thread may be used on #24359, #52-611, #33-200 and on other momentary switches with this mounting stem. 25-358 Black 25-352 Red 25-350 25-351 Yellow boot with Same as 25-358 except recessed “cold start “ with recessed “horn” symbol. symbol.
Cold-rolling steel body, zinc plated and enhanced with chromate coating, provides strength and environmental resistance to surpass application requirements. PRECISION BALL SWITCHES As the leading manufacturer of precision ball-actuated switches, Pollak® has provided custom switches to meet the requirements of OEM's and aftermarket suppliers. Typical applications include: neutral and top gear sensing, back-up lamp switching, anti-lock brake switching, power takeoff interlock and operator presence detecting.
CHARACTERISTICS: 21-370 Normally Open - Sealed Terminals Special Features Part No. Thread Hex Free Position Make/Break Connector Mating Connector 21-363 9/16-18 7/8 .421 / .416 (10.69-10.57) .406 / .391 (10.31-09.93) Packard 56 Series 029S4092 21-364 9/16-18 7/8 .421 / .416 (10.69-10.57) .408 / .390 (10.36-09.93) Ford Automotive Type C0AF-14A121-A 21-370 9/16-18 7/8 .421 / .416 (10.69-10.57) .406 / .391 (10.31-09.93) Packard Weather Pack 12015792 21-400 9/16-18 7/8 .
IGNITION STARTER SWITCHES Momentary Start Universal Type Die-Cast Housing COMMON AVAILABLE SWITCH CHARACTERISTICS HIGH IMPACT BASE ONE PIECE ZINC DIE-CAST HOUSING SPUN OVER TERMINAL BASE 360 SOLID COPPER CONTACTS & WIRING INTERNALLY LUBRICATED FOR LONGER LIFE LOCK CYLINDER & KEY BRASS TERMINALS MANY BASE STYLES AVAILABLE (SEE CHART) HEAVY CHROME PLATED BRASS MOUNTING.
OFF 4-POSITION SWITCHES ON / ACC ACC FUNCTIONS & POSITIONS Key Removable in "Off" Position Only START (SPRING RETURN TO ON) 31-242 31-180 31-610 Base Type Part No.
4-POSITION SWITCHES FUNCTIONS & POSITIONS Key Removable in "Off" Position Only OFF ACC ON / ACC 31-322 31-112 START (SPRING RETURN TO ON) (HOUSING TIED TO GROUND TERMINAL) Key Logo Key code # of Lip Seals M/H/P Pollak D250 2 * Spring return aux. / glow plug warmer N Pollak PK556 0 2 Special Hardware Clips 31-257 Y L/Cyl Mfg D250 1 5 O-Ring Sealed Base, Spc.
3 POSITION SWITCHES FUNCTIONS & POSITIONS Key Removable in "Off" Position Only OFF ON / ACC 31-297 31-267 START (SPRING RETURN TO ON) (HOUSING TIED TO GROUND TERMINAL) Key code # of Lip Seals M/H/ P L/CYL Mfg D250 1 5 Y Pollak Universal 1 5 31-345 N Pollak Universal 1 4 3A 31-285 N L/CYL Mfg D250 2 5 3A 31-297 Y Pollak Universal 1 4 Base Type Part No.
2-POSITION SWITCHES FUNCTIONS & POSITIONS Key Removable in "Off" Position Only OFF ON 31-604 Key code # of Lip Seals M/H/P Pollak PK580 0 2 N None Various 0 .75”D 31-603 N Pollak PK556 0 .75”D 5 31-604 N Lever 0 .75”D 6 31-117 N No L/Cyl 0 2 6 31-282S N PK556 0 2 Base Type Part No.
IGNITION STARTER SWITCHES (Special Applications) ACC OFF ACC OFF ON / ACC ON / ACC START New Keyless Operation Off-Acc Key Removable in Off, Acc Only 31-527 SPECIAL 4 POSITION IGNITION SWITCH Specially designed with glow plug ‘warm’ position. New 31-537 (Not Shown) Same as 31-527 except with lever.
SWITCHES OUR NEW ENCAPSULATED “REMOVABLE KEY” VERSION OFFERS THE ULTIMATE IN SECURITY AND EASE OF OPERATION (Anti-Rotation Pin Version, also available) BATTERY MASTER DISCONNECT SWITCHES Master disconnect switches designed for 12 VDC vehicles (Truck, Automotive, Marine, RV) to disconnect all circuitry to reduce possibility of theft or accidental electrical fires. Available in keyed or lever versions, with or without indexing pins, and various sizes of terminal studs.
WIRING DIAGRAM FOR S.P.S.T. MASTER DISCONNECT SWITCH WIRING DIAGRAM FOR D.P.S.T. MASTER DISCONNECT SWITCHES. FOR USE WITH ALTERNATOR OR GENERATOR SYSTEMS Part Numbers: 51-304, 51-318, 51-319 Part Numbers: 51-302, 51-315, 51-316, 51-307 Master Disconnect Switch Master Disconnect Switch B F A *Regulator Starter Switch Starter Switch Generator F A OR B or Battery Alternator Starter Starter Battery GR. GR. NOTE: Hex nuts against base Must remain stationary and Must not be tightened or loosened.
SWITCHES ELECTRONIC DIMMER CONTROLS Part No. Max Current Load Connector Type Panel Mount Manufacturer Application 52-262 10 Amp Packard Metri-pack #12034344 7/16”-28 Thread Mack/Volvo/Gm* 52-263 10 Amp Packard 56 Series 3/8”-32 Thread Freightliner**,Peterbilt**, Kenworth** * Note: Does not apply to all Volvo/GM models. Check with Manufacturer. ** Installation sheet included for connecting terminals to connector.
SOLENOID SWITCHES AUTOMOTIVE, TRUCK, FARM TRACTOR, INDUSTRIAL, CONSTRUCTION, OFF-THE-ROAD, RECREATIONAL VEHICLE APPLICATIONS TYPICAL APPLICATIONS INCLUDE: SNOW PLOWS, TRUCK WINCH, LIFT TRUCKS, LOW VOLTAGE EQUIPMENT, Contact Terminals 5/16"-24 Thread 6-24 VDC Systems Bracket Mounting Holes; 5/16" x 19/32" Plated Steel or Phenolic Housings 2 1/8" on Center Ignition & Ground Terminals, # 10-32 thread Contact Factory for availability of additional solenoids.
DOOR SWITCHES 52-622 52-620 (SEALED) Door Jamb Switch for most Ford and Chrysler products, 14V at 10 Amps Lamp Load Overall length 2-1/8", Plunger travel 3/16", Self-tapping thread. Self-Adjusting. 52-620 52-622 Mating Connector for 52-620 Switch. Three 8" 18 gauge wire leads. 52-633 52-620 with mounting hardware. 52-624 (KIT) 52-620 Switch and 52-622 Mating Connector.
CIRCUIT BREAKERS
#10-32 Zinc Plated, Brass CIRCUIT BREAKERS What are Circuit Protection Devices and how do they work? Circuit Protection Devices are manufactured for use in multiple power strips, boats, recreational vehicles, battery charges, welding equipment, portable generators, agricultural equipment, trucks, passenger and school buses and off-road construction equipment. GENERAL OPERATING PRINCIPLES Circuit Protectors are single pole thermal type devices.
Typical Circuit Breaker Applications Accessory Circuit, Cooling Fan, Door Locks, Headlamps, Tail Lamps, Window Lift, Sunroof, Trailering Package CIRCUIT BREAKERS - TYPE I Cycling - Automatic Reset Single Pole Thermal Type Breakers Rating From: 5A to 50A; 12VDC. Operating Temperature: -10 F (-23°C) to 150°F (65°C). Storage Temperature: -20°F (-29°C) to 200°F (93°C). Applications: Battery charges, trucks, buses, RV's, trolling motors, etc. Approvals: Complies with SAE Standard J553.
NOTES: STUD TERMINALS VS .250QC BLADE TERMINALS Circuit Breakers - Type II Stud Terminal Type ACCESSIBILITY/VIBRATION Non-Cycling - Modified Reset is not easily accessible or subject to vibration then stud terminals/lock washers are preferred. Designed with an additional resistive component this style breaker remains open as long as power is available or until the load is removed.
CIRCUIT BREAKERS - TYPE II Maxi-Style Plug-In OEM style replacement circuit breaker for Ford, Paccar, & Freightliner Body= (29.mm) L x (8.90mm) W x (21.6mm) H Blades= (12.7mm) L MAXI STYLE METAL: TYPE II-Non-Cycling-Blade Terminals Blade Terminals Style 20 54-950 Generic 30 54-951 Generic ATO STYLE METAL: TYPE II-Non-Cycling-Blade Terminals 54-950 ATO Style Plug-In OEM style replacement circuit breaker for Ford Class 8 Vehicles Body= (29.mm) L x (8.90mm) W x (21.6mm) H Blades= (12.
CIRCUIT BREAKERS - HIGH AMP Manual trip push button on Series 54-870PL. Open circuit indication via reset lever position. Type I & III Single Rate Thermal Type Breakers Rating: from 40A to 150A; 12VDC. Operating Temperature: -25 F(-32°C) to 180°F(82 C). Storage Temperature: -30 F(-34°C) to 300°F(149°C). Applications: Typically used in auxiliary and accessory circuits - trucks, buses, RV's and marine applications. Others might include battery charges and DC audio systems.
CIRCUIT BREAKERS ATC TYPE II – MODIFIED RESET Single pole thermal – style breakers, 12 VDC. Part No. Ampere Rating 54-910 10 54-911 15 54-912 20 Part No. Ampere Rating 54-970 10 Body = (.483”) L x (.250”) W x (1.06”) H. 54-971 15 Blades – (.354”) L. Compatible with 280 fuse blocks. 54-972 20 Part No. Ampere Rating Gray Plastic Housing with silver cover. 54-975 10 Body = (.483”) L x (.250”) W x (1.06”) H. 54-976 15 Blades – (.354”) L. Compatible with 280 fuse blocks.
SPECIALIZED ELECTRICAL PRODUCTS 47
SPECIALIZED ELECTRICAL PRODUCTS SPECIFICATIONS Interchangeable Blade Terminals: Accepts ATC® blade-type fuses, or bladetype, auto or manual reset circuit breakers. Wiring: Output terminals - .250" x .032" OC rated 30A max. per circuit; Input terminals - #10-32 stud input rated 150A max. Positions: Provides 6-24 protected output circuits. Material: Black, UL rated 94 VO thermoplastic, -20°F to 150°F. Applications: Compact and lightweight, yet rugged enough for use in trucks, buses, boats, RV’s etc.
BATTERY JUMPER TERMINALS Jumper terminals designed to provide remote mounting for battery connections either inside or outside of the vehicle. Easily installed, the positive terminal can be individually used or in conjunction with the negative terminal as a pair. Rubber caps, solid brass studs, brass hex nuts and brass lockwashers. Dimension for grooved contact post: 13/16" (20.63mm) dia., 1-1/8" (28.77) long.
Look What’s NEW… Pollak® has a “new and improved” website; visit us at www.pollakaftermarket.
VALVES 51
FUEL TANK SELECTOR VALVES FLOUROSILICONE O-RING STAINLESS STEEL SHAFTS PORTS AND HOUSING ARE MOLDED IN ONE PIECE TO ELIMINATE LEAKS AT THE SEAM SILVER PLATED COPPER GUAGE CIRCUIT CONTACTS FOR RELIABLE OPERATION HIGH TORQUE 12 VOLT REVERSING MOTOR 3//8” DIA. SUPPLY PORT 5/16” DIA.
FUEL TANK SELECTOR VALVES 42-151 3 PORT MOTORIZED VALVE Maximum Fuel System Pressure: 65 psi Fuel Hose: 3/8" ID. Connector (Required): 42-203 Recommended Fuse: 7.5A 42-308 KIT-3 PORT MOTORIZED VALVE; CONNECTOR, SWITCH AND FACE PLATE 42-151 Contains: 42-151, 42-203, 34-592, 42-201 Specifications: Same as 42-151 SERVICE TIPS Motorized Valves – Use 18 AWG (or heavier wire for long runs) to insure adequate voltage at the valve during operation.
FUEL TANK SELECTOR VALVE ACCESSORIES Rocker Switch 34-359 Reversing Rocker Switch, (Main/Aux.) On-On D.P.D.T.2 Positions, 6 Blade Terminals with Jumper Blades, Fits .830” x 1.450” Panel Cutout in .093, .125, .187 thick panels. Black Bezel & Actuator. Housing has nylon gasket for protection against moisture intrusion. 34-592 Toggle Switch D.P.D.T. Circuit: DPDT ON-ON Reversing Positions: 2 Termination: 6 Screw 2 Jumper Blades Mounting: 15/32" Dia.
ALARMS 55
BACK-UP ALARMS ® Pollak provides a complete family of back-up alarms manually adjustable and single level. Selection of a back-up alarm should result in an alarm that has a sound level output higher than the ambient noise level of the work environment. Features Standard To Pollak® Electronic Back-Up Alarms: Manufactured of high-impact, non-corroding nylon. 100% Factory Tested Solid state electronics sealed against dust, moisture, and vibration. Can be used in positive or negative ground vehicles.
BACK-UP ALARMS ® Pollak provides a complete family of back-up alarms manually adjustable and single level. Selection of a back-up alarm should result in an alarm that has a sound level output higher than the ambient noise level of the work environment.
41-820 (12-24 Volts) SINGLE LEVEL 97db The rugged and compact 41-820 allows replacement of unnecessarily large and bulky alarms currently used on light and medium duty trucks, dump trucks, motor homes, campers, electric fork lifts and other similar applications. SPECIFICATIONS: Single level...97dB(A) ± 4 @ 4' Multi-voltage -12-24 volts Voltage spike protected Reverse polarity protected Current draw less than 0.3 amps Solid state electronics Certified conformance to S.A.E.
MERCHANDISING DISPLAYS 59
MERCHANDISING DISPLAYS ® ELECTRICAL PRODUCTS SINCE 19O9 BANNERS RV Banner (shown) 18"H x 30"Wide 53-340 RV Heavy Duty Banner 18"H x 30"Wide 53-340 HD BLISTER BOX PACKAGING WIRE RACK DISPLAYS DISPLAY BOARDS UPC BAR CODED PACKAGING 60
MERCHANDISING DISPLAYS MOMENTARY START SWITCHES TOGGLE SWITCHES Heavy Duty – 50 Amps, 12 Volt D.C. Extra Heavy Duty – 60 Amps, 12V, 40 Amps 24V 53-210 Contains Assortment 6 each #34-212 and #34-213 53-359 Contains 12 #24-359 53-212 Contains 12 #34-212, with Short Bat Handle 53-360 Contains 12 #24-360 53-213 Contains 12 #34-213, with Long Bat Handle. 53-372 Contains 12 #24-372 PUSH PULL SWITCHES Heavy Duty – 75 Amps, 12 Volt D.C.
Pollak® Connector & Towing Center Pollak® Connector and Towing Center… supporting the Great American Outdoors End Cap Display: 53-136 (consult factory to create your own customized display) 53-117 FLEET DISPLAY BOARD Assortment contains each of the following: P/N 24-372 Momentary Start Switch P/N 31-103 Universal 4 Position Ignition Switch P/N 31-114 Universal International Harvester Type Replacement Ignition Switch P/N 34-212 Heavy Duty 2 Position Toggle Switch P/N 34-213 2 Position Toggle Switch With E
Packaging & Merchandising Options Connectors, Adapters & Switches for the Value conscious consumer: Currently available: • 4-Pole Connectors • 6-Pole Connectors • 7-Pole Connectors • RV Connector Adapters • Heavy Duty Toggle Switches • Heavy Duty Push-Pull Switches • New Products added often, look for updates… • Most popular connector and adapter items available • Attractive packaging – easy order box quantities • Connectors certified to SAE J560 specifications • All products validated in Pollak’s® Certifie
Pollak® ELECTRICAL CONTROLS SINCE 1909 Canton, Massachusetts Phone: 800-225-6046 Fax: 800-888-1126 Website: www.pollakaftermarket.com A Stoneridge Company WIRING COLOR CODES No. RECREATION VEHICLE HEAVY DUTY TRUCK 7 - POLE CONNECTORS 7 - POLE CONNECTORS Color Circuits Recommended Wire Gauge No.
WIRE GUAGE SELECTION CHART Note: This chart is based upon a 10% voltage drop. For 5% voltage drop, use double the measured wire length. When mechanical strength is a factor, use next larger wire gauge. 12-VOLT SYSTEM Total length of Cable in Circuit from Battery to Most Distant Lamp 2.5 Ft. GA. AMPS Candle (Appl). Power 1.0 6 20 1.5 10 20 2 16 20 3 24 20 4 30 20 5 40 20 6 50 20 7 60 20 8 70 20 10 80 20 11 90 20 5 Ft. GA. 10 Ft. GA. 20 Ft. GA. 30 Ft. GA. 40 Ft. GA. 50 Ft. GA. 60 Ft.. GA. 80 Ft.
POLLAK® Numerical Part Number Index PART # PAGE# PART # PAGE# CONNECTORS CONNECTORS CON’T 11-200………….…………13 11-400………….…………11 11-402……………….……11 11-403………………….…11 11-404….…………………11 11-405…….………………13 11-408……….……………11 11-409………….…………11 11-410…………….………11 11-500……………….……11 11-501………………….…11 11-502…………….….…...11 11-600…....……….………10 11-602……….……………10 11-603………….…………10 11-604……………….……10 11-605…….………………10 11-606……….……………10 11-607………….…………10 11-608…………….………10 11-609……………….……10 11-613………………….
POLLAK® Numerical Part Number Index PART # PAGE# PART # PAGE# TOGGLE/ROCKER SWITCHES CON’T MISC. ELECTRICAL PRODUCTS 34-575Q…….…………….20 34-576..……….…………..20 34-576Q…………….…….20 34-577…………………….20 34-577LQ………………....20 24-577Q………….……….20 34-578………………..…...20 34-578Q………….……….20 34-579…………………….20 34-579Q…………………..20 34-580…………………….20 34-580L….………………..20 34-580LQ………………....20 34-580Q…….…………….20 34-581Q…………….…….19 34-586………………….…19 34-586Q….……………….19 34-588……….……………19 34-588Q……….………….19 34-591LQ………….……...
300 Dan Road Canton, MA 02021 (781) 830-0340 • Fax (781) 830-9570 FAX ORDER ENTRY 1-800-888-1126 www.PollakAftermarket.
