Specifications

BOOT NUT ASSEMBLIES
WEATHER and DUSTPROOF Neoprene rubber type Boot Nut Assemblies. With 5/8-32 thread,
Can be used on #52-611 and #33-200 and on other Momentary Switches with this Mounting Stem
25-372
Protective Collar - Safety Bezel with
5/8"-32 thread may be used on #24-
359, #52-611, #33-200 and on other
momentary switches with this
mounting stem.
52-611
Universal-Mounting Bushing
3/4"Long, 5/8"diameter. Hex
Pal Back Nut knurled Face Nut
assembled. 25 AMPS @ 6V, 15 AMPS
& 12V. Mounts in 5/8 "diameter hole.
SEALED PLUNGER SWITCHES
2 Positions: On- Off
Normally On (Push to Off)
52-624
Sealed Plunger Switch #52-620 and Mating
Connector #52-622. 10 Amps at 14V. Self tapping
thread. Self-Adjusting, Switch length 2 1/8“. Mating
connector has three 8" 18 gauge wire leads.
MARINE
15 Amps at 12V
52-600
REPLACES: 21A11500A, Screw
Terminals. 15 AMPS @ 6V, 10
AMPS @ 12V, 15/16” Mounting
Hole Required. Mounting Stem
7/8”-20, .45” long. Supplied with
7/8”-20 palnut.
26
21-541
Momentary Switch -Normally On (Push to
Off). Moisture Proof with two 6" 16 gauge
wire leads with Packard Electric Connector
#12010973. Mates with Packard #12015792.
MOMENTARY SWITCHES
2 Positions: On- Off Normally On (Push to Off)
33-200
ALL BRASS, CHROME PLATED Button and
Face Nut Furnished. Brass Back Nut and Washer
Mounting Stem 1 1/4" Long 5/8” diameter.
25 Amps @ 6V. Fits 1" thick panel.
25-358
Black
25-352
Red
52-623
Door Jamb Switch to accept two
Bullet terminals. 5 Amps at 12V.
REPLACES: Ford OA1-13713,
BOA-13713, B9MF-13713A,
C3AZ-13713A.
SWITCHES
25-351
Same as 25-358 except
with recessed “horn”
symbol.
25-349
Same as 25-352 except
with recessed “start”
symbol.
25-350
Yellow boot with
recessed
“cold start “
symbol.
52-620
52-622
21-560
Same as 21-541 except Normally Closed (Push
to On). Mates with Packard # 15300027
52-613
Same as 52-611 except with
25-358 boot nut and PVC coated
body for weather and dust
protection. 14” wire loop.