Specifications

TYPICAL APPLICATIONS INCLUDE: SNOW PLOWS, TRUCK WINCH, LIFT TRUCKS, LOW VOLTAGE
EQUIPMENT,
6-24 VDC Systems
Plated Steel or Phenolic Housings
Ignition & Ground Terminals, # 10-32 thread
CONTINUOUS DUTY (6-24VDC), 150Amps In Rush "S.P.S.T."
Normally Open Contacts - Off On
38
52-307-01
52-315
52-307-01 12V, 100 Amps,
Continuous Duty, Insulated, with
hardware. UL listed.
SOLENOID SWITCHES
AUTOMOTIVE, TRUCK, FARM TRACTOR, INDUSTRIAL, CONSTRUCTION, OFF-THE-ROAD, RECREATIONAL VEHICLE APPLICATIONS
INTERMITTENT DUTY (6-12VDC, 750Amps Make, l00 Amps Break)
"S.P.S.T." Normally Open Contacts - Off On
52-305-01
Contact Terminals 5/16"-24 Thread
Bracket Mounting Holes; 5/16" x 19/32"
2 1/8" on Center
52-327 12 Volt, continuous
duty. 100 Amps
52-329 12 Volt, continuous
duty. 200 Amps
52-330 12 Volt, 2 circuits,
,DPST Normally Open
/Normally Closed,
continuous duty. 100 Amps,
insulated
52-324-01 Same as 52-307-01 except
24 Volt, continuous duty. 100 Amps,
(not shown, not UL listed)
52-315 Same as 52-307-01 except
coated with protective grey
plastic coating. (Dust & Moisture
Resistant)
52-312-01 Same as 52-307-01
except grounded with three terminals
(not shown, not UL listed).
Double Pole Single Throw
52-305-01 UNIVERSAL - 12-V
Applications - Grounded Base,
Flat Bracket, Internally grounded
to housing, other end connected
to small terminal.
52-331 (Replaces 52-304). 12V,
600 Amp make, 200 Amp break,
Normally off, SPST, one circuit
Off/On , Short Case.
52-328 12V, 100 Amp, SPST,
Insulated, Short Case
Contact Factory for availability of additional solenoids.
52-339 24 Volt, continuous
duty. 200 Amps
52-340 24 Volt version of 52-330
52-333 Heavy Duty, SAE J1171 Marine
Rated , 10 Min. Duty Cycle
52-334 Heavy Duty same as 52-333 but not
Marine Rated
52-332 24V, 2 Min Cycle
version of 52-331