Specifications

7-POLE SOCKETS
WIRE INSERTION STYLE SOCKETS
 Meets and exceeds all standards of
SAEJ560
(SAE applies only to solid pins)
 Floating pins for ease of alignment and
maximum contact.
 Optimum slant mount and drain slot rid
housing interior of accumulated moisture.
 Will accept the widest range of gauges
from #16 wires to #8 ground wire. Ground
Terminal Pin #1 will accept #14 gauge
min. to #8 gauge max. Other terminals will
accept #16 gauge min. to #10 gauge max.
 40 Amps continuous duty @ 6-28 VDC.
 Self grounded. (Zinc Die-Cast Units Only)
to #1 Ground Terminal.
 Stainless steel spring.
 Recommended Mounting Hole is 2"
diameter
 Interchangeable with competitive makes.
ACCESSORIES
11-779
Hardware Kit for
7-Pole Molded
Polla/Glass Sockets
11-777
Hardware Kit
for 7-Pole Plugs
(except RV)
11-720
Solid Pin
2 hole mount
7
DRAI
N SLOT IN COVER
BOTTOM LIP EXTENDED
FOR BETTER PLUG
SUPPORT
BUILT-IN OPTIMUM SLANT
FOR DRAINAGE
11-729
Solid Pin
3 hole mount
ZINC
DIE-CAST
11-730
Split Pin
3 hole mount
11-721
Split Pin
2 hole mount
No. Color
Wire
Gauge
FMVSS-
121 Anti-
Lock
Gauge
Circuit
1
White 10 8 Ground Return
2
Bl
ack
12
12 Clearance, Side Marker and Identification
Lamps
3 Yellow 12 12 Left Turn & Hazard Signal
4
Re
d
1
2 10 Stop Lamps & Anti-Lock Devices
5 Green 12 12 Right Turn Signal & Hazard Signal
6
Br
own
12
12 Tail, Rear Clearance Marker, License
Plate Lamp
7
Bl
ue
1
2 12 Auxiliary Circuit / ABS Power
11-723
Nylon socket
Solid Pin
POLLA/GLASS
GLASS FILLED
NYLON
11-724
Nylon socket
Split Pin
11-771
7-Pole Socket bracket.
Fits all 7-Pole Sockets
including 11-851.
11-780
Neoprene rubber
gasket for 3 hole
mount die-cast sockets.
May be used as
template
11-773
Same as 11-780
except for 2 hole
mount sockets.
11-761
7 Pole Socket
Rubber Socket Boot
for 11-720,11-721, 11-
723, 11-724, 11-
729,11-730 and 11-
852; seals against dust
and moisture, 1.5"
long. For .460-.720
diameter cable.
11-781
Hardware Kit
for 7-Pole Zinc
Die-Cast Socket