User guide

User Guide - Heatless Desiccant Air Dryer
8 17-100-0100
3. General safety
For your own safety, when carrying out work on the dryer, please comply with
all relevant national safety regulations relating to pressurised systems.
3.1 Intended use of the dryer
The dryer is exclusively intended for drying compressed air, which is free from bulk
water, oil and solid matter constituents.
The dryer should be sited within a building and protected against the weather. The
dryer must be operated only in accordance with the data on the rating plate and in
accordance with the contractual conditions. Any operations that do not comply with
those stated on the product rating plate will render the warranty void.
This dryer is only designed to operate at pressures of between
4 barg and 12 barg. It is not suitable for pressures in excess of
12 barg.
No modifications must be made to the dryer. Any modifications may reduce the
operational safety of the dryer and invalidate the manufacturer’s warranty, potentially
resulting in damage to the product or cause serious personal injury
3.2 Personnel
Only authorised and qualified personnel are permitted to work on the dryer. This
operating manual is intended solely for such personnel and is to be used only as a
reference; it should not be used to replace conventional training.
3.3 Safe handling
Please ensure the relevant national safe handling procedures are employed when
lifting or moving the dryer.
Where possible use a suitable lifting aid to minimise the risk of
physical injury or damage to the product.