Product Manual

ManualsBrandsCTEK ManualsAC to DC Battery ChargersXC 0.8 6V 800mA 4 Stage Battery Charger

EN • 3

6V/0.8A

XC 0.8

CHARGING

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The error lamp will indicate if the battery

clamps are incorrectly connected. The reverse polarity protection will ensure that the

battery or charger will not be damaged.

3.Follow the indication lamps through the charging process.

The battery is fully charged when is lit.

4. Stop charging at any time by disconnecting the mains cable from the wall socket.

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

6V/0.8A

XC 0.8

CTEK COMFORT CONNECT

MAINS CABLE

DESULPHATION

BULK

ABSORPTION

FULLY CHARGED

PULSE, MAINTENANCE CHARGING

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

*Supply plugs may differ to suit your wall socket.

MANUAL

ERROR LAMP

Summary of content (5 pages)

PAGE 1
MANUAL to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SUPPLY PLUG* MAINS CABLE CTEK COMFORT CONNECT CHARGE CABLE charging 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected.
PAGE 2
TECHNICAL SPECIFICATIONS Charger model XC 0.8 Model number 1054 Rated Voltage AC Charging voltage 220–240VAC, 50–60Hz 7.2V Start voltage 3.7V Charging current 0.8A max Current, mains 0.
PAGE 3
CHARGING PROGRAM XC 0.8 is equipped with a multi purpose charging program. XC 0.8 charges all batteries 1.2–100Ah in the temperature range of -20˚ to +50˚C (-4˚F to +122˚F). ABSORPTION PULSE CURRENT (A) 11 7.2V 2 Increasing voltage to 7.2V 0.8A 3 7.2V Declining current 4 6.4V‒7.2V 0.8‒0.4A STEP 1 desulphation Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead plates of the battery restoring the battery capacity.
PAGE 4
INFO If the battery clamps are incorrectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged. XC 0.8 6V/0.8A Comfort Connect – + – + Comfort Connect 6 • EN For batteries mounted inside a vehicle 1. Connect the red clamp to the battery's positive pole. 2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery. 3. Connect the charger to the wall socket 4.
PAGE 5
CTEK offers a professional customer support: www.ctek.com. For latest revised user manual see www.ctek.com. By e-mail: info@ctek.se, by telephone: +46(0) 225 351 80, by fax +46(0) 225 351 95. By mail: CTEK SWEDEN AB, Rostugnsvägen 3, SE-776 70 VIKMANSHYTTAN, SWEDEN. VIKMANSHYTTAN, SWEDEN 2011-09-01 Bengt Hagander, President CTEK SWEDEN AB CTEK productS ARE protected by 2011-09-19 Patents Designs Trade marks EP10156636.