Product Manual

ManualsBrandsCTEK ManualsBattery ChargersMXS 5.0 12V 5A Battery Charger

EN • 3

MODE

RECONDAGM

12V/5A

MXS 5.0

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

SMALL

BATTERY

PROGRAM

ERROR LAMP

NORMAL

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

AGM

OPTION

RECOND

OPTION

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery or

charger will not be damaged.

3. Press the MODE-button to select charging program.

SMALL BATTERY PROGRAM NORMAL BATTERY PROGRAM

Continue to press the MODE-button to combine charging program with charging options.

AGM OPTION RECOND OPTION

Press the MODE-button several times until the desired combination of charging program and

options are lit.

4. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE BUTTON

MANUAL

AGM

Summary of content (6 pages)

PAGE 1
MANUAL to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. SUPPLY PLUG* HOW TO CHARGE 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The power lamp will indicate that the mains cable is connected to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected.
PAGE 2
CHARGING PROGRAMS Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The selected program will be restarted next time the charger is connected. AGM RECOND Battery Size (Ah) Explanation If the error lamp is lit, check the following: 1. Is the chargers positive lead connected to the battery´s positive pole? 2. Is the charger connected to a 12V battery? The table explains the different Charging Programs: Program ERROR LAMP Temp range 1.
PAGE 3
CHARGING PROGRAMS AND OPTIONS COMBINATIONS SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE Current (A) EN Voltage (V) DESULPHATION + AGM + RECOND + AGM + RECOND + AGM + RECOND + AGM + RECOND Time limit: 15.8V 0.8A until 12.6V Increasing voltage to 14.4V. 0.8A Declining current 14.4V Checks if voltage drops to 12V 13.6V 0.8A 12.7V–14.4V 0.8–0.3A 15.8V 0.8A until 12.6V Increasing voltage to 14.7V. 0.8A Declining current 14.7V Checks if voltage drops to 12V 13.6V 0.8A 12.7V–14.
PAGE 4
STEP 1 DESULPHATION Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead plates of the battery restoring the battery capacity. STEP 2 SOFT START Tests if the battery can accept charge. This step prevents that charging proceeds with a defect battery. STEP 3 BULK Charging with maximum current until approximately 80% battery capacity. STEP 4 ABSORPTION Charging with declining current to maximize up to 100% battery capacity.
PAGE 5
Model number 1075 Rated Voltage AC 220–240VAC, 50–60Hz Charging voltage 14.4V, AGM 14.7V, 15.8V Min battery voltage 2.0V Charging current 5A max Current, mains 0.6A rms (at full charging current) Back current drain* <1Ah/month Ripple** <4% Ambient temperature -20°C to +50°C, output power is reduced automatically at high temperatures Charger type 8 step, fully automatic charging cycle Battery types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity 1.
PAGE 6
LIMITED WARRANTY CTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. This limited warranty is not transferable. The warranty applies to manufacturing faults and material defects for 5 years from the date of purchase. The customer must return the product together with the receipt of purchase to the point of purchase.