Owner manual

CTI Products, Inc. NCB-AY User Guide
3. Network Variable Control 17
3. NETWORK VARIABLE (NV) CONTROL
TYPICAL NV BINDINGS
All commands sent to the NCB module are carried on the LonTalk network in
the form of Network Variables bound to the Control Neuron processor inside the
NCB module (connected to Side A of the internal router). This section details the
Functional Blocks (objects) and the network variables of each. The Modem
Controller Objects and Directory Objects will be functional only if a modem is attached to the “PORT”
connector.
The Modem Controller Object is typically used in conjunction with the Directory Object and some other event-
generating object which causes connection control information to be given to the Modem Controller Object.
This information initiates modem dialing so that, once a connection is established, transfer of data can be
accomplished via the modem.
Figure 6 is an example of typical network variable bindings.
Figure 6 Typical Network Variable Bindings
This Section
contains details
of Network
Variables and
Bindings
Phone Book
Object
Some Alarm
Device
nviReqDialStr
nvoDialStr
Modem
Controller
Object
nviDialStr
nviCallCancel
nvoConnectStat
nvoCallCancel
nvoReqDialStr
nviConnectStat