Owner manual

CTI Products, Inc. NCB-AY User Guide
Appendix B. Mounting Options 34
APPENDIX B. MOUNTING OPTIONS
Wall mount and EIA 19” rack mount kits are available as options for the NCB from CTI Products, Inc. The
wall mount kit includes brackets to allow a single NCB module to be mounted to any flat surface. The rack
mount kit includes an adapter allowing up to three NCB modules to be mounted in a single rack unit height.
Rack Mount Option
The rack mount option allows up to three NCB modules to be mounted in a one rack unit height (1.75 inches) of
a standard 19 inch rack. The modules are mounted in the rack plate by removing its front bezel and remounting
the module into the rack plate. Figure 9 shows an exploded view of the rack mount installation. The top
diagram shows the front view of the bracket with one module installed. The bottom two diagrams show a side
view of the module installation into the rack adapter and rack adapter installation into the rack, respectively.
CA-80113-100
1 2 3 4 5 6 7 8 ON
OPTION A
DC IN
ERR
ACT PWR
RSVCCSVC
AUDIO LINECD OH
RESET
CMD
NCB NETWORK COMBINER
NETWORK
FACEPLATE
SPACER
Figure 9 NCB Module Rack Mounting