User guide
18
J&F Down
“J&F Down” mode allows the J and the F key ngers
to remain on the table. The other ngers must remain
raised above the trigger point for key activation.
To send an J or an F key raise and then lower your
nger on that key while the other nger (on the J or
the F) remains on the surface. If your nger is not on
the other key it will not give you the J or the F. For
example; if you want a J key. Make sure both ngers
are down on the J and the F then raise and lower your
J nger. Do the opposite for the F key. All other keys
work the same way as the “All Up” mode”.
Finding the Home Row in J&F Down Mode
After pressing the space bar if you miss the home row
with either the J or the F key ngers a buzzing sound
will occur until you move to the proper keys alerting
you of the home row misalignment.
Changing Typing Modes
Go into the menu mode by pressing the Fn and the
M key. Choose “Advanced” by using the space bar
then pressing enter . Next Choose “Type Mode”.
Use the space bar and select “All Up” or “J&F Down”.
Press ESC to exit.