User guide

NOTE

If 120 seconds has elapsed since you started the

VK200 and the VK200 is operating on battery

power and no Bluetooth connection is established

with the PC then you will need to restart the VK200,

press FN and B or go into the Menu under settings

to restart Bluetooth pairing mode.

6. ADJUSTING THE SENSITIVITY

VK200 KEYFOB

features sensitivity adjustment for

better accuracy. There are two ways to adjust the

sensitivity:

1. Press Fn and M to go into menu mode. Next

select Settings by clicking the enter key then use the

space bar to choose Sensitivity and press enter. Next,

select the sensitivity desired. Click ESC to exit menu

mode.

2. Quick change mode allows increasing or

decreasing the sensitivity, by pressing the FN key and

the S key. To lower sensitivity, keep pressing this key

combination to cycle through all settings.