Product Manual

4
RULES FOR SAFE OPERATION
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the
equipment.Exercisecautionatalltimeswhenoperatingequipment.
1. Read the tractor and snow blade owners manuals and know how to operate your tractor before using tractor with snow
blade attachment.
2. Never operate tractor and snow blade without wearing proper clothing suited to weather conditions and operation of
controls.
3. Neverallowchildrentooperatetractorandsnowblade,anddonotallowadultstooperatewithoutproperinstructions.
4. Alwaysbeginwithtransmissioninrst(low)gearandgraduallyincreasespeedasrequired.
LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT
SAFETY PRECAUTIONS. IT MEANS – ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED.
ENGLISH
PREPARING THE LAWN TRACTOR
SECTION 1:
ASSEMBLY INSTRUCTIONS
CAUTION: Beforebeginningpreparation,
selectarmandlevelsurfacewhichislarge
enough to accommodate the snow blade
attachment and tractor. Engage brake lock.
NOTE: When preparing the lawn tractor for assembly of
snowbladeattachment,storeallitemsremovedwiththe
mowing deck.
1. Allowengine,muferandexhaustdeectortocoolbefore
beginning.
2. Disconnect the spark plug wire(s) from the spark plug(s)
and ground against the engine.
3. Remove the mowing deck as instructed in the belt removal
section of the owner's manual for the lawn tractor.
4. Remove any front mounted attachment which may be
installed on your tractor.
TOOLS REQUIRED FOR ASSEMBLY
(2)7/16"Wrenches
(2) 1/2"Wrenches
(2) 9/16"Wrenches
(1) 3/4"WrenchorAdjustableWrench
WARNING:Stopengineandletmufercool
before installing hitch brackets.
REMOVING PARTS FROM CARTON
Remove all parts and hardware packages from the carton. Lay
out all parts and hardware and identify using the illustrations
on pages 2 and 3.
NOTE: Not all parts in the hardware pack will be needed
foranyonetractort-up.
NOTE: Right hand (R.H.) and left hand (L.H.) are determined
from the operator's position while seated on the
tractor.