Warranty

15Section 4 — ASSembly & inStAllAtion
4. Insert the end of the discharge chute top mounting bracket
into the hole provided on the cutting deck as detailed in 2
of Figure 4-28.
5. Pivot the discharge chute rearward inserting the tab in
the discharge chute top mounting bracket into the space
provided between the mowing deck and the discharge
chute hinge, as shown in 3 of Figure 4-28.
1
2
3
Figure 4-28
6. Attach the retainer strap on the discharge chute to the
retainer clip on the deck. See Figure 4-29.
Figure 4-29
6. Locate the upper chute tube and install the 723-04009A
chute strap included in hardware pack 689-00340, to the
upper chute tube using a 710-0924 machine screw and
712-04064 flange nut provided In hardware pack 689-
00337. See Figure 4-26.
Figure 4-26
7. Peel the backing off of the self-adhesive foam strip (721-
04388) that has been included with your grass collector.
Apply it to the upper chute, flush against the flange as
shown in Figure 4-27.
Flange
Figure 4-27
Installing the Discharge Chute On The Tractor
1. Reinstall the cutting deck, if previously removed, to the
tractor reversing the instructions for Deck Removal in
operator’s manual of the tractor.
2. Raise the deck to its highest position.
3. Raise the chute deflector (1 in Figure 4-28) on the deck and
hold it while you position the discharge chute over the
chute opening.