Operator's Manual

OPERATION

Double Bagger Usage

NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage the PTO, turn

the tractor engine off and set the parking brake.

1. Open bagger cover by pushing in on the rear side tabs with your hand (1),

and lifting the cover with your other hand in the center rear of the bagger

cover (2) as shown in Figure 32.

2. Do not remove the hose from the tractor.

3. Remove both bag assemblies from the hanger rails by lifting the back edge

up first, and then sliding the front edge out and up until it is clear of the

frame. See Figure 33.

4. Empty the grass clippings at a proper disposal site, use the handle at the

bottom of each grass bag. Holding the bag firmly, empty the contents.

5. Replace grass bags, close lid, flip down seat, restart your tractor, release

parking brake and resume cutting your grass.

Figure 32

Figure 33