SDS

SAFETY DATA SHEET
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
FormulaShell SAE 10W-30 Motor Oil
Version
1.4
Revision Date:
03/15/2018
SDS Number:
800001028894
Print Date: 03/16/2018
Date of last issue: 08/27/2015
7 / 16
protective eyewear is recommended.
Skin and body protection
:
Skin protection is not ordinarily required beyond standard
work clothes.
It is good practice to wear chemical resistant gloves.
Protective measures
:
Personal protective equipment (PPE) should meet recom-
mended national standards. Check with PPE suppliers.
Thermal hazards
:
Not applicable
Environmental exposure controls
General advice
:
Take appropriate measures to fulfill the requirements of rele-
vant environmental protection legislation. Avoid contamination
of the environment by following advice given in Chapter 6. If
necessary, prevent undissolved material from being dis-
charged to waste water. Waste water should be treated in a
municipal or industrial waste water treatment plant before
discharge to surface water.
Local guidelines on emission limits for volatile substances
must be observed for the discharge of exhaust air containing
vapour.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
:
Liquid at room temperature.
Colour
:
amber
Odour
:
Slight hydrocarbon
Odour Threshold
:
Data not available
pH
:
Not applicable
pour point
:
-43 °C / -45 °F
Method: Unspecified
Initial boiling point and boiling
range
:
> 280 °C / 536 °F
estimated value(s)
Flash point
:
228 °C / 442 °F
Method: Unspecified
Evaporation rate
:
Data not available
Flammability (solid, gas)
:
Data not available
Upper explosion limit / upper
flammability limit
:
Typical 10 %(V)