Operator`s manual

delivery, the spring is located in the first position. When the belt stretches after use,

adjust the tension by relocating the spring in the other two holes. If the belt has

stretched to the point that the belt is not tight enough even in the last hole it is

necessary to replace the belt.

4.05 - Belt Replacement

If the belt has been stretched or damaged to the point where the proper tension can not

be obtained it must be changed.

FM48/FM60/FM72 OPERATOR’S MANUAL

MAINTENANCE 24 CUB CADET YANMAR

Fig. 13

1. tensioner

2. belt

3. pulley

4. spring

5. hitch plate

Fig. 14

1. drive pulley

2. central pulley

3. side pulley

4. belt

5. belt tensioner

6. hitch plate

7. spring