Operator`s manual

Controls and Features

Snow thrower controls and features are described below and

illustrated in Figure 4-1.

Shift Lever

The shift lever is located in the right side of the

handle panel and is used to determine ground

speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is

the slowest and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the

slower and two (2) is the faster.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust

upward for hard-packed snow. Adjust downward when

operating on gravel or crushed rock surfaces. See Set-Up &

Assembly section.

Augers

When engaged, the augers rotate and draw snow into the auger

housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute

assembly.

Headlight

The headlight is located on the handle panel and is automatically

turned on when the engine is started.

† If Equipped

Drive Control

Headlight †

Chute Assembly

Clean Out

Tool

Augers

Skid Shoe

Shift Lever

Chute Directional Control

Auger Control

Steering Trigger Control †

Heated Grips †

Figure 4-1