Use and Care Manual

9
Operating Instructions
Periodic Maintenance:
Tighten fasteners as needed before each use. •
Empty hopper and thoroughly clean Lawn Sweeper after each use. •
Remove any materials that have wrapped around brushes or brush shaft •
after each use.
Lubricate wheel bearings and gears annually with a light coating of white •
lithium grease.
Storing Lawn Sweeper:
Empty hopper bag and thoroughly clean Lawn Sweeper before storing. 1.
Store Lawn Sweeper away from excessive heat to prevent damage. 2.
Brushes must not contact ground during storage to prevent damage. 3.
Remove quick-release pins to separate hopper bag from Lawn Sweeper. 4.
Fold drawbar into storage mode and pin in place to secure. 5.
Carefully remove tension tube and collapse hopper bag for compact storage. 6.
Offset Sweeping:
Remove both pins from drawbar. 1.
Slide drawbar on hitch cross tube to farthest holes on desired side. 2.
Re-pin both pins. 3.
Resume normal towing of sweeper. 4.
Durring opertion be mindful of wider towpath of sweeper 5.