Operator`s manual
Unfolding the Handle
Remove the star knobs and carriage screws from the lower
2.
Reinstall the carriage screws and knobs removed earlier.
Tighten the upper and lower star knobs and carriage 4.
screws to secure the upper handle to the lower handle. See
The handle height can be adjusted to any of three 5.
Maintenance and Adjustments section of this manual.
Attaching the Shift Lever
Remove the screw and the lock nut that secures the shift
Remove the remaining screw and nut from the lower shift 2.
aligning the holes in the lever with the holes in the shift
Secure the lever to the plate using the two screws and two 4.
10 se c t i O n 2 — as s e M b l y & se t -up