Operator`s manual

Battery (Electric Start Models Only)
!
Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals known
to the State of California to cause cancer and
reproductive harm. Wash hands after handling.
The battery is sealed and is maintenance-free. Acid levels cannot
be checked and fluid can not be added.
Always keep the battery cables and terminals clean and 
free of corrosive build-up.
After cleaning the battery and terminals, apply a light coat 
of petroleum jelly or grease to both terminals.
If removing the battery for cleaning,
disconnect the NEGATIVE (Black) wire from its

When reinstalling the battery, always connect the

NEGATIVE (Black) wire. Be certain that the wires are
connected to the correct terminals; reversing them

alternating system.
Tire Pressure
Warning! Under any circumstance do

tire pressure should be maintained at all times. Refer
to sidewall of tire for recommended pressure.

tires. Uneven tire pressure will cause the cutting deck to mow
unevenly and may result in mower to veering to either the
left or right during operation. Refer to the tire side wall for tire

as necessary.
Cleaning the Mower
Any fuel or oil spilled on the machine should be wiped off


part of the machine, especially the belts and pulleys.
Smart Jet

as part of its deck wash system.

underside and prevent the buildup of corrosive chemicals.

Before using the deck wash system,
always disengage the Blade Control, stop engine
and remove key to prevent unintended starting.

enough for your garden hose to reach.

chute is directed AWAY from your house, garage,
parked cars, etc.
2.



Turn the water on.4.
Start the engine and place the throttle lever in the FAST 5.
(rabbit) position.
6.

7.
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
8.
9.

Turn the water off and detach the hose coupler from the 

After cleaning your deck with the Smart Jet system, start the

the blades. Keep the cutting deck running for a minimum of
two minutes, allowing the underside of the cutting deck to
thoroughly dry.

19se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s