Instructions / Assembly

778-13400A
3
ATTACHING THE STEERING WHEEL
Open the wheel cover
and remove the bolt and
washer.
Once tightened, replace
the wheel cover.
Attach the wheel using
the bolt and washer.
Tighten to 18-22 ft-lbs.
Make sure the front
wheels are straight, then
attach the wheel with the
center line of the steering
wheel facing forward and
centered on the hood.
4
ATTACHING THE SEAT
Remove the nuts and
bolts on the seat pan.
Securely tighten down the
hardware using the ⁄"
ratchet and channel locks
(or ⁄" wrench). Tighten
to 85-105 in-lbs.
Attach the nuts and bolts
with the nuts facing in.
Be sure to replace the
plastic clip in the seat pan
before the bolts.
5
CONNECTING THE BATTERY
Locate the provided clips
on the wire harness.
Once attached, be sure
to cover the positive
terminal.
Use the ⁄" and ⁄"
wrenches to attach
the battery cables, the
positive (red) first and
then the negative (black).
Push the clips into the
body panel to lock in place.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
INSTANT INSTALL