Full Product Manual

10 Section 2 — ASSembly & Set-Up
Side Lever Adjust
To adjust the position of the seat, pull up and hold
the seat adjustment lever. Slide the seat forward
or rearward to the desired position; then release
the adjustment lever. Make sure seat is locked into
position before operating the tractor. See Figure 2-16.
Figure 2-16
Knob Adjust
To adjust the position of the seat, rotate the seat
forward and locate the clamp knobs (a) on the front
of the seat pan. See Figure 2-17.
(a)
(b)
Figure 2-17
Rotate the clamp knobs (a) to the left and remove
them, slide the seat forward or backward and
re-insert the clamp knobs (a) into one of the four
available positions (b) on the seat pan and into the
seat, then tighten both securely. Make sure the
seat is locked into position before operating the
tractor. See Figure 2-17.
Fuel Fill-Up
Using a good grade of unleaded regular gasoline,
fill the tank (beside the engine on the left side of
the mower). When the fuel tank reaches one inch
from the top of the tank, stop, DO NOT OVERFILL.
Space must be left for expansion.
Notes