SDS

Typical Physical Characteristics
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Technical Data Sheet
FormulaShell
®
10W-30 Conventional Motor Oil
Conventional Motor Oil
Meets API Service Categories SN, SM, SL etc. and Resource Conserving ILSAC GF-5 specifications.
Has enhanced wear protection and outstanding resistance to thermal breakdown at operating temperatures.
Performance, Features & Benefits
FORMULASHELL
®
CONVENTIONAL MOTOR OIL meets
or exceeds the North American warranty requirements for
U.S., European and Japanese cars and light trucks with
gasoline and gasoline turbo-charged engines where API
SN with Resource Conserving, SN, SM, SL, SJ etc. oils are
specified.
Benefits are as follows:
Protection for extremely high temperatures.
·
Protection against harmful deposits and acids, which aids
in a clean running and lasting engine.
·
May be used at any time in an engines life-cycle and is fully
compatible with conventional engine oils.
·
Main Applications
FORMULASHELL
®
CONVENTIONAL MOTOR OIL is
formulated for improved fuel economy and to provide
engine protection and performance required by modern
engines.
FORMULASHELL
®
CONVENTIONAL MOTOR OIL is
compatible with other conventional and synthetic oils. It
exceeds all automobile and light truck warranty requirements
for gasoline and turbocharged engines where an API SN and
ILSAC GF-5 oil is recommended.
Specifications, Approvals & Recommendations
GM 6094M
·
Chrysler MS-6395
·
Exceeds the requirements of the following industry
specifications:
API SN and all previous categories
·
ILSAC GF-5
·
For a full listing of equipment approvals and
recommendations, please consult your local Shell Technical
Help Desk.
Always follow manufacturer's recommendations and
specifications for viscosity grade and API service.
Properties Method FormulaShell
®
Conventional
Motor Oil
SAE Viscosity Grade
10W-30
API Service Category
SN
ILSAC
GF-5
Density kg/m
3
ASTM D4052 869
Flash Point
0
C
ASTM D93 228
Pour Point
0
C
ASTM D97 -33
Viscosity @40
0
C mm
2
/s
ASTM D445 69.8
Viscosity @100
0
C mm
2
/s
ASTM D445 10.5
Viscosity Index
ASTM D2270 139
CCS Viscosity @-25
0
C cP
ASTM D5293 6,120
MRV Viscosity @-30
0
C cP
ASTM D4684 18,900
Page 1 of 2 FormulaShell 10W-30 (SN/GF-5), v 1.0 23.09.2015.19.24