Instructions

①

Visual inspection

•

check the entire circumference carefully for any crack or damage between

the Inner Pot lid and the pressure packing.

Since a badly assembled packing can cause the rice/food to be half-cooked or burned by steam leakage, double

check the packing thoroughly as described below.

(look for parts sticking out of the inner) (look for parts sticking out of outer rim) (look for parts sticking out of damaged parts)

③ Water boiling test

• Pour water into the Inner Pot up to water level 2 (for “Rice”) and press the Menu/Selection button to select the self-cleaning mode.

Then push the Pressure Cook button.

• Within 10 minutes, the pressure regulator weight will start rattling and hissing while emitting stream. If there is no steam coming out from the

pot other than through the pressure regulator weight the packing has been properly installed.

• If steam comes out from other parts, stop the test and pull out the power cord. Wait until the pot unit cools down before removing the

pressure packing from the lid. Once reinstalled repeat the boiling test.

• For a more precise water boiling test, you can wrap plastic around the circumference of the closed Top Cover. By doing so, you can easily

check where the steam leakage is.

• If you still have a problem with reassembling the packing, please contact our Customer Service.

②

Physical inspection

• Check if the pressure packing is thoroughly

put into the groove by rubbing the inside rime

of the packing with a finger around the entire

circumference as shown in the picture above.

• Check if the pressure packing is properly put

into the groove of the Inner Pot lid by pushing

the outer rim with a finger around the entire

circumference as shown in the picture.

• Check if the pressure packing is thoroughly

put into the groove by pushing the inside of

the rim packing with a finger around the entire

circumference as shown in the picture.

How to double check whether the packing is well assembled

Normal

assembly

Abnormal

assembly

Normal

assembly

Abnormal

assembly

HOW TO CLEAN

※ICOOK Q5 SUPERIOR : Pictures may look different from the actual product.

The method of installation for Dual Motion Packing / Packing is same.

(ICOOK Q5 PREMIUM / SUPERIOR)