Instructions

HOW TO CLEAN
16
How to use the handle
•If the lamp does not turn on, it would
not operate the “Cook” and “Preset”
buttons. Make sure the handle is
located in “Lock”.
2. To close the top cover turn the
handle to unlock shown in the
picture on the right. (Make sure
to turn the handle to "unlock".)
1. Make sure the inner pot is
place correctly inside the main
body.
3. If there is excess steam inside the
inner pot, it may be difficult to lock the
handle. Cautiously pull up the pressure
weight and allow the excess steam to
release. Then try to turn the handle
again.
When top cover does not close perfectly
How to clean the soft steam cap
※ Do not touch the surface of the soft steam cap right after cooking. You can get burned.
(this may cause burns or scalding).
Do not try to close the top cover by force. It may damage your cooker and cause problems.
❶ Peel off the soft
steam cap as
shown in the
image above by
grasping the
dented part with
your fingers and
pulling to the side
while lifting gently.
❷ Disassemble soft steam cap in the rear by
pressing in the direction of the arrow and
wash it frequently with a neutral detergent.
※ Carefully insert the packing.
❸ When you are putting the soft steam
cap together, match the bump on the
bottom, press it towards the arrow and
make sure both the hooks in the front
is locked in.
❹ When installing
the soft steam
cap, insert the
cap firmly by
pressing it in the
direction as
shown above.
1. After cooking, turn the handle from “Lock” to “Unlock” to open
2. If there is unreleased steam in the Inner pot it maybe difficult to
turn the handle. In this case, twist (cautiously pull up) the
pressure weight and let the excess steam out. (See more detail
of the pressure weight on page 11.) Do not open by force.
3. Handle must be turned to “Unlock” to open and close the lid.
※ Pictures may look different from the actual product