Service manual

CULLIGAN HOUSEHOLD & COMMERCIAL CIRCUIT BOARDS
10
CCoonnnneeccttiioonnss
Meter Connection
Cam Connection
Dip Switch
Aqua-Sensor
Connection
Power Connection
1. Plug in.
Press status.
12:00 will appear.
AM
Displays flashing
Set Time-of-Day. ALL MODELS.
I2:00
1
Press  to increase or
 to decrease
2. Press status.
AM
Set Recharge Time.
ALL MODELS. Step 3 is currently not
used.
2:00
1 2
3. Press status. Set Salt Dosage (3-15 lb for 9”, 5-24 lb for
12”). ALL MODELS.
8
1233
4. Press status. Set Backwash Time
(5-40 minutes). ALL MODELS.
I0
123 44
Programming
Upon plugging in the Culligan
®
Mark 100 control, the display will flash 8888. To access the programming
mode, press the status button. Refer to diagrams below for the programming sequence.
Press  to increase or
 to decrease
Press  to increase or
 to decrease
Press  to increase or
 to decrease