Service manual

CULLIGAN HOUSEHOLD & COMMERCIAL CIRCUIT BOARDS
35
There are two pilot lights located on the circuit board.
• The green pilot light flickers when water is flowing through the water meter.
• The amber pilot light is a latching indicator, when the preset gallons count has passed, the amber light
will illuminate indicating that the unit will regenerate that night.
The softener also has a ten gallon setting to assist the service personnel in trouble shooting the equipment. To
trouble shoot the meter, set the dip switches to the OFF position. Run water into a measured pail. The green
light will flicker. When ten gallons has passed, the amber light will light up. This will help determine if the meter is
properly measuring the gallons count.
Connections
Dip Switches
Green
LED
Amber
LED
Reset Switch
Connection
Regen Button
Connection
Meter
Connection
Power
Connection
CCoonnnneeccttiioonnss