MSDS

Westinghouse 4-Stroke Small Engine Oil
Information about fire and explosion protection: No special measures required
7.2 - Conditions for Safe Storage, Including any Incompatibilities
Requirements to be met by storerooms and receptacles: No special requirements
Information about storage in one common storage facility: not required
Further information about storage conditions: keep container tightly sealed
7.3 - Specific end Use(s)
No further relevant information available
Section 8: Exposure Controls/Personal Protection
8.1 - Control Parameters
Regulatory Information
WEL (Great Britain) : EH40/2011
AGW (Germany): TRGS 900
VME (France) ED 984, 10.2016
DNELs: not available
PNECs: not available
Additional Information
The lists alid during the making were used as basis
Ingredients with Limit Values that Require Monitoring at the Workplace
128-37-0 2,6-di-tert-butyl-p-cresol (0.8%)
WEL (Great Britain): Long-term value = 10 mg/m
3
AGW (Germany): Long-term value = mg/m
3
4(II); DFG, Y, 11
VMW (France): Long-term value = mg/m
3
8.2 - Exposure Controls
Based on the composition shown in Section 3, the following measures are
Suggested for occupational safety measure.
Appropriate Engineering Controls:
Keep away from foodstuffs, beverages, and feed
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work
Store protective clothing separately
Avoid contact with the eyes
Avoid contact with skin
See Section 7 for information about technical facilities design
Personal Protective Equipment:
Respiratory Protection - In case of brief exposure or low pollution use
respiratory filter device. In case of intensive or longer exposure, use
self-contained respiratory protective device
Protection of Hands - protective gloves. The glove material has to be
impermeable and resistant to the product/the substance/the preparation/
the chemical mixture. Selection of the glove material on consideration of
the penetration times, rates of diffusion, and the degradation
4