Spec Sheet

ManualsBrandsCummins Power Generation ManualsLiquid-CooledCummins Ag Spec 60kW Open Diesel Generator (120/240V Single-Phase)

power.cummins.com

Specification sheet

Diesel

generator sets

for the Ag

Market

Features and Benefits

Robust product design and testing - The

generator is designed to operate under

extreme environmental conditions. The

generator is tested and certified per the latest

EPA and UL standards.

Heavy duty engine - Rugged 4-cycle industrial

diesel delivers reliable power and fast response

to load changes.

Alternator - Several alternator sizes offer

selectable motor starting capability with low

reactance 2/3 pitch windings, low waveform

distortion with non-linear loads and fault clearing

short-circuit capability.

Control system - Provides total generator set

system integration including automatic remote

starting/stopping, precise frequency and voltage

regulation, alarm and status message display,

output metering, auto-shutdown at fault

detection and NFPA 110 Level 1 compliance.

Cooling system - Standard cooling package

provides reliable running at up to 50 °C

(122 °F) ambient temperature. Coolant heaters

also come standard on generator sets for

starting well below freezing.

Battle Short Mode – This mode will allow the

generator to override certain faults that would

normally shut the generator down.

Flexible exercise mode - The innovative,

flexible exercise mode enables the generator to

exercise at a time, frequency and duration that

suits the customer's preference reducing

unnecessary fuel consumption, emissions and

noise.

Self-diagnostics and easy service - The

generator is equipped with Cummins

PowerCommand® electronic control to provide

industry-leading self-diagnostic capabilities. In

addition, critical components of the generator are

designed to ensure service and preventive

maintenance can be completed in a short period

of time

Standby 60 Hz

Model Model Number kW kVA

C60D6 A060A345 60 60

C80D6C A061T469 80 80

C100D6C A061T471 100 100

C125D6D A060A344 125 125

C150D6D A061T474 150 150

C175D6D A061T476 175 175

C200D6D A061T477 200 200

Summary of content (4 pages)

PAGE 1
Specification sheet Diesel generator sets for the Ag Market Features and Benefits Robust product design and testing - The generator is designed to operate under extreme environmental conditions. The generator is tested and certified per the latest EPA and UL standards. Cooling system - Standard cooling package provides reliable running at up to 50 °C (122 °F) ambient temperature. Coolant heaters also come standard on generator sets for starting well below freezing.
PAGE 2
Generator set specifications Model C60 D6 C80 D6C C100 D6C Controller Operating temp. range Circuit Breaker C125 D6D C150 D6D C175 D6D C200 D6D 800 * 800 * C175 D6D C200 D6D PowerCommand 1.1 -40° F to +122° F 250 400 * 600* Governor reg. class 600 * 800 * ISO 8528 Part 1 Class G3 Voltage regulation, no load to full load ± 1.0% Random voltage variation ± 1.0% Frequency regulation Isochronous Random freq. variation ± 0.
PAGE 3
Accessories • • • • • • Battery heater kit Engine oil heater Remote control displays Auxiliary output relays (2) Auxiliary configurable signal inputs (8) and relay outputs (8) Annunciator – RS485 • • • • • • • Audible alarm Enclosure Sound Level 1 & 2 Battery charger – stand-alone,12 V Circuit breakers Remote monitoring device – PowerCommand 500/550 Base barrier – elevated generator sets Alternator heater This outline drawing is for reference only.
PAGE 4
Codes and standards Codes or standards compliance may not be available with all model configurations – consult factory for availability. This generator set is designed in facilities certified to ISO 9001 and manufactured in facilities certified to ISO 9001 or ISO 9002. The Prototype Test Support (PTS) program verifies the performance integrity of the generator set design. Cummins products bearing the PTS symbol meet the prototype test requirements of NFPA 110 for Level 1 systems.