Instruction Manual
Tetra® Snap DS
Bright as a new penny
Tetra® Snap DS modules pump out 400 lumens each, and
can be installed at three different spacings, for a maximum
1000 lumens per foot. No other cabinet sign product
comes close.
Load ‘em up
Load 33 Tetra® Snap DS modules per 100W power supply,
enough to light a single 64” x 80” sign.
One product to rule them all
The most exible product on the market, Tetra® Snap DS
is suitable for cabinets ranging from 10” to well over 36” in
depth, all with the same material.
You may be wondering what the catch is. But it only gets
better. Here’s how to install Snap:
Step 1: Snap modules into extrusion.
Step 2: Install extrusion into sign.
Step 3: Plug in. Enjoy results.
No catch. Tetra® Snap.
Depth Max stroke
Double
sided
10” - <12”
(254 mm - <305 mm)
13” (330 mm)
12” - <14”
(305 mm <356 mm)
16” (406 mm)
14” - <16”
(356 mm - <406 mm)
18” (457 mm)
>16” (>406 mm) 20” (508 mm)
Spacing GuidelinesTetra® Snap DS Features
Wide 170° beam angle
Efcacy: 153 lm/W
24 Volt DC, Class 2 (UL), Class III (IEC)
10-year limited warranty