User guide

Yes cancels the print-driver installation.
No returns you to the last open screen of the installer.
Installing the software when the printer is already connected to a
computer
If the product is already connected to a computer when you begin installing the software, Windows
automatically detects the product and uses Plug-n-Play to install the printer driver. During this
process, Plug-n-Play calls the Add Printer Wizard to automatically install the printer driver and the
USB port. When Plug-n-Play completes, you are given the option to install the additional support files.
If you prefer, you can cancel Plug-n-Play and run the Add Printer Wizard manually to install the
printer driver. This procedure is not recommended if you are using Windows 98 SE or Me because
the Add Printer Wizard does not install the USB port for these operating systems. If you are using
Windows 98 SE or Me, when the Add Printer Wizard completes you must unplug the USB cable from
the product and then plug it in again so that Windows can use Plug-n-Play to install the USB port.
At the end of the Add Printer Wizard, you are given the option to install the additional support files.
This section shows the dialog box options that appear during the Add Printer Wizard.
Figure 6-19 Step 1 - Add Printer Wizard Welcome Screen
Next takes you to the Local or Network Printer dialog box.
Cancel exits the Add Printer Wizard.
ENWW Installation dialog-box options for Windows 109
Windows software
installation