User guide

Installation options
The HP LaserJet 1022 printing-system software can be used in one of the following configurations:
■ Directly connected to a computer. This configuration provides the most printer functionality.
■ Connected to a network through the HP internal network port.
Macintosh installation instructions for direct connections
This section provides information about the following topic:
■ Installation instructions for Mac OS X, V10.2 and later
NOTE Install the software before connecting the product to the computer.
Direct-connection installation instructions for Mac OS X, V10.2 and later
Use the instructions below to install the software on a Macintosh computer running Mac OS X, V10.2
and later.
1 Insert the HP LaserJet 1022 printing-system software CD into your CD-ROM drive.
2 Run the installer CD.
3 Open the Print Center or Printer Setup Utility (for Mac OS X, V10.3.x) by clicking HD, clicking
Applications, clicking Utilities, and then clicking Print Center or Printer Setup Utility.
4 If the HP LaserJet 1022 Series printer appears in the list of printers, go to step 9. If it does not
appear in the list of printers, go to step 5.
5 Click the Printers menu, and then click Add Printer... .
6 Select USB in the drop-down list.
7 In the Printer Model box, click HP LaserJet 1022, and then click Add.
8 Select HP LaserJet 1022 in the Printers menu, and then click Make Default.
9 Print a page from any program to make sure that the software is correctly installed.
NOTE If the installation fails, see the HP LaserJet 1022 Series Printing System Install
Notes on the HP LaserJet 1022 printing-system software CD, see the flyer that came in
the box with your printer, or go to the following Web site for help or more information:
www.hp.com/support/lj1022
Macintosh installation instructions for networked computers
To install the HP LaserJet 1022 printing-system software on networked Macintosh operating
systems, follow the instructions for your operating system.
ENWW Installation options 35
Macintosh