User guide

To configure the Use different paper options for a print job
For each option, you can set a different tray in the Source Is: drop-down menu. For some options,
the Type is: drop-down menu is also available.
1 To use different media or cover stock, select the Use different paper check box. A list of options
appears in the dialog box. The full set of selections is visible when you scroll by using the down
arrow button to the right of the list.
2 To use different media for the pages within the print job, select the appropriate option (First
Page, Other Pages, or Back Cover) in the dialog box.
3 Click OK to print.
NOTE You must use the same size of media for the entire print job. All options that you
select from the available Use different paper options use the size selected in the First Page
settings.
When you change the type and source of the media and covers, the settings you select
remain configured until you close the software program.
Each option for the Use different paper setting is described in the following sections, in the order
they appear in the pane below the Use different paper check box.
Back Cover options
The following illustration shows the Back Cover setting and options that you use to include a blank
or preprinted back cover on a document.
Figure 4-5 Back Cover setting
The Back Cover options are as follows:
■ Source is: drop-down menu
■ Type is: drop-down menu
ENWW Host-based features 57
Windows driver features