User guide

Using HP Embedded Web Server (EWS)
The HP EWS allows you to view product and network status and to manage printing functions from
your computer instead of from the product control panel. Below are examples of what you can do
using the HP EWS:
■ View product status information.
■ View and print internal pages.
■ Order new supplies.
■ Set the type of paper loaded in each tray.
■ View and change the product default configuration settings.
■ View and change network configuration.
The HP EWS works when the product is connected to an IP-based network. The HP EWS does not
support IPX-based product connections.
NOTE You do not have to have Internet access to open and use the HP EWS. However, if
you click a link in the Other Links area, you must have Internet access to go to the site
associated with the link.
To open the HP Embedded Web Server
1 In a supported Web browser, type the TCP/IP address or the hostname for the product. To find
the TCP/IP address, print a Configuration page at the product by pressing and holding the GO
button for 5 seconds.
NOTE Once you open the URL, you can bookmark it so that you can return to it quickly
in the future.
2 The HP Embedded Web Server has three tabs that contain settings and information about the
product: the Information tab, the Settings tab, and the Networking tab. Click the tab that you
want to view.
80 Chapter 5 HP Embedded Web Server (HP LaserJet 1022n and
HP LaserJet 1022nw printers only)
ENWW
Embedded Web Server