Specifications

GB-19
Adjusting Salt Consumption
Salt consumption must be adjusted to correspond to the water hardness level in your area. If you don’t
know how hard the water in your home is, please ask the company that supplies water in your area.
It is recommended that adjustments should be made in accordance with the following chart.
WATER HARDNESS
Selector
Position
Salt Consumption
(gram/cycle)
Number of cycle
/ 1.2 kgs
˚dh ˚fh ˚Clark mmol/l
0-8 0-14 0-10 0-1.4 / 0 /
8-22 14-39 10-28 1.4-3.9 - 20 60
22-45 39-80 28-56 3.9-8 Mid 40 30
>45 >80 >56 >8 + 60 20
turn
To optimise and customise the level of salt consumption, please follow the steps below.
1. Remove the lower basket and unscrew the reservoir cap.
2. There is an arrow-shaped indicator in the reservoir, which you can turn. You may turn it to the “-” or “+”
settings based on the water hardness in your area.
1 ˚dh (German degree) = 1.25mmol/l
1 ˚fh (French degree) = 0.178mmol/l
1 ˚Clark (British degree) = 1.78mmol/l
• Do not use everyday table salt or cooking salt
as they contain insoluble substances which
could damage the dishwasher.
• Do not pour detergent into the salt container.
This will damage the dishwasher.
CID45B10_IB_110426.indd 19 4/26/11 8:15 PM