Specifications

GB-9
INSTALLATION
10. Install the Aesthetic Panel onto the dishwasher door. Ensure the aesthetic panel weight is a
minimum of 3kg and a maximum of 6kg. After the aesthetic panel is installed, the tension of the
dishwasher door spring can be adjusted by rotating the adjusting bolt. If the tension is right, the
door will remain horizontal in the fully open position.
4 X 18 screw
Cover
Spacer for
aesthetic
panel
Hook for
aesthetic panel
Aesthetic panel
Outer door of
dishwasher
Lower hook
Hop hook
ST4 countersunk
head screw
11. Ensure to tighten the screws on both sides of
the dishwasher door and to secure the Aesthetic
Panel.
Rubber cover
Screw
4*14 screw
Loosen
12. Adjust the bolt to loosen or tighten the tension
of the dishwasher door.
CID45B10_IB_110426.indd 9 4/26/11 8:15 PM