SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Storage:
Keep out of the reach of children. Keep container tightly closed.
Store in a well ventilated place. Do not store at temperatures above
49⁰C / 120⁰F. Keep from freezing.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETER
Exposure Guidelines
Occupational Exposure Limits
Chemical Name
OSHA-PEL
ACGIH-TLV
Crystalline Silica, Quartz
0.1 mg/m³
0.025 mg/m³ (Resp.)
Propylene Glycol Phenyl Ether
Not Available
Not Available
8.2 EXPOSURE CONTROLS
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of
dust, fume, vapor, etc.) below recommended exposure limits.
8.3 INDIVIDUAL PROTECTION MEASURES
8.3a. Personal Protective Equipment:
i. Eye/Face Protection: Wear approved eye protection [properly fitted dust- or splash-proof
chemical safety goggles/face (face shield)]
ii. Skin Protection:
1. Hand Protection: Wear impervious gloves, such as nitrile.
2. Body Protection: Wear suitable protective clothing
iii. Respiratory Protection: A NIOSH approved respirator or filtering face piece, such as N95,
is recommended in poorly ventilated areas or when permissible exposure limits may be
exceeded. Respirators should be selected by and used under the direction of a trained
health and safety professional following requirements found in OSHA’s respirator standard
(29 CFR 1910.134) and ANSI’s standard for respiratory protection (Z88.2).
iv. General Health and Safety Measures: Handle according to established industrial hygiene
and safety practices. Do not eat, smoke or drink where material is handled, processed or
stored. Wash hands carefully before eating or smoking. Wash contaminated clothing before
reusing.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.):
Sanded Paste(Various Colors)
Odor:
Characteristic
Odor Threshold:
Not Available
Page 5 of 11
Fusion Pro® Single Component® Grout