Cybex Bravo Lift Owner’s Manual Strength Systems Part Number 18030-999-4 A www.cybexintl.
Table of Contents Safety Safety Guidelines And Practices . . . . . . . . . . . . . . . . Securing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . Regular Maintenance Activities . . . . . . . . . . . . . . . . . Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . Label Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 7 8 9 Assembly Machine Specifications . . . . . . . . . . . . . . . . . . . . . . 10 Tools Required . . . . . . . . . . . . . . . . . . . .
Cybex 18030 Bravo Lift Owner’s Manual Safety Safety Guidelines And Practices Cybex International partners with equipment owners to establish the safest and most effective setup of Cybex equipment. Cybex International urges each facility owner to carefully follow all safety precautions. Following theses precautions are the best protection against personal injury or damage to equipment or facility. The most important safety precaution is to maximize stability for every piece of equipment.
Cybex 18030 Bravo Lift Owner’s Manual • se the selectorized and plate loaded machines as shown on placards. DO NOT modify the U machine. • ever pin the weights in an elevated position. DO NOT use the machine if found in this condition. N Seek assistance from floor staff. Weights pinned up have the potential to fall if the user pulls the pin. Floor staff should lower the weights to prevent potential problems.
Cybex 18030 Bravo Lift Owner’s Manual • I nspect the equipment for worn or loose components prior to use. Tighten/replace any loose or worn components before to using. Pay close attention to belts, cables, grips or pulleys and their connections. Always look for potential problems in equipment condition. Loose components should be tightened to function properly. Replacing worn components maintains the equipment is in the best condition for regular use.
Cybex 18030 Bravo Lift Owner’s Manual Securing Equipment Do not use machine until it is properly anchored. The machine has holes in the feet, which allow for ease in anchoring to the floor. All anchoring holes must be used to maximize stability. Equipment must be secured to a solid, level surface to eliminate rocking, tipping, or falling over due to incorrect usage and misuse.
Cybex 18030 Bravo Lift Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal and safe operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in the maintenance section of this manual. Briefly, they include: Daily Clean upholstery. Weekly • Inspect all nuts and bolts for looseness.
Cybex 18030 Bravo Lift Owner’s Manual Warnings and Cautions Warning decals indicate a potentially hazardous situation that could result in death or serious injury if the precautions are not observed. Caution decals indicate a potentially hazardous situation that could result in minor or moderate injury if the precautions are not observed. SERIOUS INJURY COULD OCCUR IF WARNING 2.25 R .
Cybex 18030 Bravo Lift Owner’s Manual Label Placement 4605-381-X 9
Cybex 18030 Bravo Lift Owner’s Manual Assembly Machine Specifications Total Weight and Size: Weight Machine Dimensions at Rest 747 Lbs 46.69” W x 71.39” L x 83.63” H 339 Kg 118.62 cm W x 181.330 cm L x 212.43 H Machine Dimensions at Use Same Same The dimensions stated in the installation instructions are the recommended minimum dimensions as set forth by the manufacturer.
Cybex 18030 Bravo Lift Owner’s Manual 17000-320 12090-322 Assembly Procedure Two people will be required for this procedure. Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts. Ø .406 3 PLCS SPLIT B HE 20.85 1.47 3.38 1.69 Part Number Description 2 16010-311 Foot pad 4 13000-353 Foot pad 19.306 18.290 17.274 16.
Cybex 18030 Bravo Lift Owner’s Manual If Then Two people will be required for this procedure 1. Remove the four shipping cones using a 3/4” socket or wrench. 2. Attach foot pads to each foot of frame. 3. Remove front panel from machine. 18030 cannot fit through doorway Remove weight stack 1. Verify weight stack pin is disengaged. 2. Remove spiral pin connecting pulley using a hammer and a 3/16” pin punch.
Cybex 18030 Bravo Lift Owner’s Manual If Then 1. Move pulley and cable connection out of the way. 2. Remove guide rod caps. Guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide spring loaded guide rod cap down guide rod until cap is clear of frame. Slowly release grasp of guide rod cap and remove. 3. Remove lifting post. 4. Remove weight plates. Move handle, pulley, and cable 1.
Cybex 18030 Bravo Lift Owner’s Manual If Then Two people will be required for this procedure Separate frame 1. Remove the eight BHSCS securing the platform to the frame using a 7/32”Allen wrench and a 9/16” wrench. 18030 Cannot fit through doorway BHSCS/ Locknut Qty 8 2. Move machine to desired location. 3. Reattach frame halves and securely tighten the BHSCS and locknuts. Securely anchor machine to the floor To maximize stability, equipment must be secured to a solid level surface.
Cybex 18030 Bravo Lift Owner’s Manual Install individual weight plates one at at time 1. Position each weight plate so wide edges of bushings face upward and narrow edges of bushings face downward. CT NG RE COR WRO Wide bushing edge faces upward The narrow bushing edge must face downward. 2. Install lifting post. 3. Snap guide rods in to position. Cable routing 1. Place a small amount of loctite® on BHSCS and inside threads of ball stop. 2. Secure cable to ball stop using a 1/8” Allen wrench. 3.
Cybex 18030 Bravo Lift Owner’s Manual Exercise Intended Use The intended use of this machine is to aid or improve general physical fitness and exercise for commercial use. Instructions ead and understand all instructions and warnings prior to using this machine in the Safety R section of the Owner’s Manual. 1. Select appropriate resistance. 2. Adjust handles for desired pulley height. 3. Ensure all adjustment knobs are locked into place.
Cybex 18030 Bravo Lift Owner’s Manual LUNGE LUNGE STIFF-LEGGEDDEADLIFT DEADLIFT STIFF-LEGGED LUNGE STIFF-LEGGED DEADLIFT Motions Developed Hip Extension Muscles Used Gluteus Maximus, Hamstrings Motions Developed Hip Extension, Knee Extension Muscles Used Quadriceps, Gluteus Maximus, Hamstrings 17
Cybex 18030 Bravo Lift Owner’s Manual Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. ybex is not responsible for performing regular inspection and maintenance actions for your C machines. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting/recording.
Cybex 18030 Bravo Lift Owner’s Manual Clean Upholstery If Then 1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft damp cloth. Light Soiling 3. If necessary, apply a solution of liquid cleanser with a soft bristle brush. 4. Dampen a clean soft cloth in water and wipe residue away. 1. Prepare a solution of 10% household bleach (sodium hypochlorite) and 90% water. Dampen a soft white cloth in the solution. 2. Rub gently on the stained area. 3.
Cybex 18030 Bravo Lift Owner’s Manual Clean Chrome Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral cleaners with a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or damage the equipment. Guidelines for cleaning front panel: se clean soft cloths or sponges for application of cleaners and again for washing and rinsing.
Cybex 18030 Bravo Lift Owner’s Manual Weekly Procedures Inspect All Nuts and Bolts Tighten all loose nuts and bolts as required. WARNING: Serious injury or death may result if the following precautions are not followed. Replace all worn cables and belts. Worn cables and belts can fail if not replaced. Inspect cables and belts Inspect all cables and belts for wear or damage and proper tension.
Cybex 18030 Bravo Lift Owner’s Manual Belts Condition of Belt 3D View 3D or Side View Peeling of the belt’s skin. Wave in belt Belt is necked down (narrow section) Replace belt if any Examine edge of belt (both sides). section is over 1/32” Replace belt if any section is (.03) narrower than the narrower than the rest. rest of belt Cracks or splits One or more strands of kevlar is hanging out, or if there is a significant amount of frayed kevlar.
Cybex 18030 Bravo Lift Owner’s Manual CAUTION: Personal injury or property damage may occur if the following precautions are not followed. Do not use if less than 1/8” of material remains to the edge. Replace all worn handles immediately. Failure to replace worn handles can result in injury or property damage. Inspect bars and handles for wear, paying particular attention to tab area connection points. Replace bar if less than 1/8” of material remains to the edge.
Cybex 18030 Bravo Lift Owner’s Manual Cable Adjustment Tools Required 9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems: Cable Adjustment Description Diagram This type of adjustment uses a jam nut and a tension adjustment nut at Jam Nut the cable cam end as the primary Adjustment adjustment. The other end of the cable usually contains a roll pin adjustment.
Cybex 18030 Bravo Lift Owner’s Manual Belt Adjustment Tools Required • • 7/32” Wrench Torque wrench (lbs-in) Belt Adjustment Action 1. Using a 7/32” Allen wrench loose set screws. 2. Pull belt tight. Loose Belt 3. Secure belt in place with set screws. 4. Torque set screws to 300-350 lb-in. 5.
Cybex 18030 Bravo Lift Owner’s Manual Customer Service Product Registration To register product do the following: 1. Visit www.cybexintl.com. 2. Locate Product Registration in the Support section. 3. Fill out form completely. 4. Click the Submit button to register product. Contacting Service Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239.
Cybex 18030 Bravo Lift Owner’s Manual Ordering Parts To order parts online go to www.cybexintl.com. Select Support > Parts / Ordering. In the left navigation panel, click Parts Diagrams - Current Products. Select from the drop down boxes. To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). The following information located on the serial number decal will assist our Cybex representatives in serving you.
Cybex 18030 Bravo Lift Owner’s Manual Return Material Authorization (RMA) The Return Material Authorization (RMA) system is used when returning material for placement, repair or credit. The system assures that returned materials are properly handled and analyzed. Follow the following procedures carefully. Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if applicable.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com • techhelp@cybexintl.