Owner`s manual

Cybex 18030 Bravo Lift Owner’s Manual

If Then

18030Cannott

through doorway

1. Move pulley and cable connection out of the way.

2. Remove guide rod caps. Guide rod cap contains a compression

spring that will y if grasp is not released slowly. Slide spring loaded

guide rod cap down guide rod until cap is clear of frame. Slowly

release grasp of guide rod cap and remove.

3. Remove lifting post.

4. Remove weight plates.

Move handle, pulley, and cable

1. Remove the pin spring with a 3/16” punch and hammer securing

handle to ball stop and remove handle.

Pin Spring

BHSCS/Ball Stop

Handle

2. Remove the two Button Head Socket Head Cap Screws (BHSCS)

securing the ball stop together with a 1/8”Allen wrench.

3. Remove the BHSCS and locknut securing the pulley using a 7/32”

Allen wrench and a 9/16” wrench.

BHSCS/

Locknut

Pulley

4. Move pulley and cable out of the way.

5. Repeat steps above for opposite handle, ball stop, pulley and

cable.