Owner`s manual

Cybex 18030 Bravo Lift Owner’s Manual

If Then

18030Cannott

through doorway

Two people will be required for this procedure

Separate frame

1. Remove the eight BHSCS securing the platform to the frame using

a 7/32”Allen wrench and a 9/16” wrench.

BHSCS/

Locknut

Qty 8

2. Move machine to desired location.

3. Reattach frame halves and securely tighten the BHSCS and

locknuts.

Securelyanchormachinetotheoor

To maximize stability, equipment must be secured to a solid level surface.

• Cybex is not responsible for the actual anchoring of equipment. Consult with a professional

contractor.

• Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).

• If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or

framenotincontactwithsurfaceusingatwashers.