User guide
14
For a proper height adjustment of the CYBEX Pallas 2-fix a booster inlay (i) is
included and already inserted under the seat cover when purchased.
Note! Shoulder and headrest (e) need to be perfectly adjusted in height to provide
the best protection and comfort for your child and to also guarantee the optimal
position of the diagonal belt (f). The height of the shoulder and headrest can be
adjusted in 11 positions. The shoulder part is attached to the headrest and does not
have to be adjusted separately.
– It is recommended to use this height adjustment inlay (i) between the age of 9 and
18 months.
– For children over 19 months the height adjustment inlay (i) may be removed.
– Afterwards the height adjustment should be regulated by moving the headrest
(e) into the correct position. Pull the adjustment handle (h) in order to release the
headrest.
– The seat is correctly adjusted if you can fit 2 fingers between the bottom edge of
the headrest (e) and the shoulder of the child. Pull the adjustment handle (h) in
order to unlock the shoulder and headrest.
1. Open the press buttons at the front of the booster cover.
2. Lift the booster cover until the height adjusting inlay (i) can be easily removed from
the front.
3. Remove the height adjustment inlay (i) according to the above age
recommendation.
4. Put the seat cover back in its original position and fasten the press buttons.
By pushing the two buttons (z) the safety cushion (p) will slide into the widest position.
By releasing the buttons (z) the safety cushion (p) will be locked in position.
The side parts of the safety cushion (p) fit exactly into the armrest of the booster
cushion. They connect the safety cushion (p) and the booster (d).
The safety cushion (p) should be well adjusted to touch the child’s chest without
exerting any pressure on the child’s body.
Warning! Safety cushion (p) may only be used in conjunction with the main
frame (w) and only up to a maximum weight of 18 kg!