User guide
24
1. Pull the headrest (e) into its top position by using the release handle (h).
2. To release the headrest (e), simultaneously pull the handle (h) and the lower
rim of the upper rib of the backrest (a). Now the headrest (e) can be completely
detached.
3. Now the cover can be removed.
4. To reassemble, pull the adjustment handle (h) and insert the headrest (e) into the
backrest (a).
In order to guarantee the best possible protection of your child seat, it is necessary
that you take note of the following:
PRODUCT CARE
– All important parts of the child seat should be examined for any damages on a
regular basis. The mechanical parts must function flawlessly.
– It is essential that the child seat does not get jammed between hard objects e.g.
like the door of the car, seat rail etc. causing possible damage to the seat.
– The child seat must be examined by the manufacturer after a fall or similar
situations.
The seat cover consists of four parts which are fixed to the seat either by velcros,
press buttons or button holes. Once you have released all fixations, the cover parts
can be removed.
In order to put the covers back on the seat, proceed in the reversed order as
removing them.
Warning! The child seat must never be used without the cover.
CLEANING
It is important to use only original CYBEX seat cover since the cover is also an
essential part of the function. You may obtain spare covers at your retailer.
Note! Please wash the cover before using it the first time. Seat covers are machine
washable at max. 30°C on delicate cycle. If you wash it at a higher temperature,
the cover fabric may lose colour. Please wash the cover separately and never dry it
mechanically! Do not dry the cover in direct sunlight! You can clean the plastic parts
with a mild detergent and warm water.
Warning! Please do not use chemical detergents or bleaching agents under any
circumstances!