Service manual

Cybex Plate Loaded Owner’s Manual
Exercises
Page 4-5
Instructions
1. Load the appropriate resistance evenly.
2. Select desired back pad angle by pulling up
on the detent strap located below the seat
pad and moving the back pad to desired
position.
3. Locate feet securely on the footplate.
Maintain contact with non-slip material.
4. Lift the carriage and rotate carriage stops to
the UNLOCKED position. Grip stabilization
handles lightly.
5. Lower/lift the resistance with smooth, controlled movements while maintaining hips and
shoulders against the back pad. DO NOT HYPEREXTEND (“LOCK OUT”) KNEES.
6. With legs extended, rotate carriage stops to the LOCKED position. Lower carriage onto
stops.
7. When performing calf exercise, ensure carriage stops are in the LOCKED position.
Maintain contact with the non-slip material.
Leg Press
Specifications:
Take-off weight: 50 lbs. (22.7 kg) total
Resistance type: Constant
Effective lifting ratio: 70%
Muscles Trained
Primary - Quadriceps, Gluteals, Hamstrings
The Cybex Plate Loaded Leg Press offers effective lower body
exercise in a compact, plate-loaded format. The unique
interlock weight release system protects the user from
releasing the carriage unintentionally, while the angled
non-skid footplate promotes heel contact throughout the
complete range of motion. Plates are loaded from hip height
for ease of use and safety. The back rest is easily adjustable in
three positions to allow training flexibility. The fully enclosed
linear bearing mechanisms yield a clean, pleasing design and
prevent the user from contact with moving parts and shaft
grease.