Use and Care Manual

USE AND CARE GUIDE
MODELS
OPERATION INSTRUCTIONS
Fan Operation
Fan Speeds: Three speed settings give the customer total control of their fan at the push of
a button.
Timer: This collection features a time-delay off feature to automatically shut the fan off after
1 to 9 minutes to conveniently clear the smoke and grease after cooking. To program the
time-delay feature, press the button with the clock icon while the machine is on and then use
the lowest speed setting button to toggle between 1 to 9 minutes.
Changing Light bulbs
To change the light bulb, remove light case from the light socket. The light case can be
accessed from the inside of the body of the machine.
1. Disconnect the connecting wires of the light socket from the motherboard wires.
2. Remove grease lters and push light case outward away from the machine.
3. Replace with a new case.
Fan Housing
HC400
WARNING! Ensure that all power leading to your range hood has been disconnected
before changing bulbs. As well, ensure that lights have fully cooled before changing bulbs.
Fan
Control
Light
Control
Power/Timer
Nonstick-coated fan blades will separate grease from the air and the grease will then be
deposited into a grease cup for easy, convenient disposal. You will nd the grease cup in a
bag with the bracket and screws in the box. The grease cup can be used in conjunction with
the mesh lters with certain models, while others can only use one or the other.
Tip: Soak all parts in soapy water if there is heavy grease.
Grease Disposal
WARNING! Do not remove lters or grease cups immediately after cooking or if grease is
still hot.
Front
Back
Latch
Bafe Filters
Removal: To remove the bafe lters, locate the latch at the top of the lter and pull downwards
away from the machine.
Disassembly: To disassemble the bafe lter, locate the screw on the back of the lter,
unscrew and remove. Place screw in a safe place. Pull on latch to release the inner portion
from outer portion, then separate the two halves of the lter. The two lters can then be
placed in the bottom rack of the dishwasher or may be cleaned using stainless steel cleaner
or dishwashing detergent and water.
Reassembly: To reassemble the bafe lter, rst place the two pieces of the lter against
each other(one inner piece, one outter piece). When placing the lter together, ensure that all
tabs t into the slots to keep both pieces of the lter attached. Once both halves of the bafe
lters are securely in place, screw the screw back onto the lter.
WARNING! Ensure that all power leading to your range hood has been disconnected
before removing lters and cleaning your fan.