Owner manual

PRODUCT MANUALPRODUCT MANUAL
3332
16X2 CHANNEL USB INTERFACE MODE 16X2 CHANNEL USB INTERFACE MODE
12.2.7. Minimizing the Mixer Panel
The LR-16 Mixer Panel also be run in a minimized mode, which allows you to keep an eye on the
level meters, while the control panel itself uses much less space on your desktop.
12.3. Using the LR-16 as an Audio Interface with an OS X
12.3.1. Minimum System Requirements
Operating Systems:
Mac OS-X® 10.8 or higher
Hardware:
Any Mac hardware compatible with OS X 10.8 or higher
512 MB Ram (1GB or more recommended)
1 free USB 2.0 compatible port
! NOTE: The speed of your processor, amount of RAM, and capacity, size, and speed of your hard
drives will greatly affect the overall performance of your recording system.
A faster processor and more RAM can reduce signal latency (delay) and improve overall
performance.
12.3.2. Driver Installation
There is no driver installation for Mac Computers necessary. Simply connect the LR-16 to your
Mac® by connecting the supplied USB cable to the LR-16 USB2.0 connector on the rear panel,
and an available USB2.0 port on your Mac.
The device will now be selecteable in the “Audio MIDI Setup” application, which can be found in
the Applications/Utilities folder.
! Note that no custom LR-16 mixer control panel is available for the Mac, as there is when using the
LR-16 with Windows. The internal mixer of the LR-16 is not available when connected to a Mac,
so all monitoring must be done through the DAW software.
12.4. Using the LR-16 as an Audio Interface with an Apple® iPad®
12.4.1. Minimum System requirements
Operating Systems:
iOS® 5 or higher
Hardware:
iPad® 2 or newer
Apple® iPad Camera Connection Kit)
Apple Lightning to USB Camera Adapter
12.4.2. Driver Installation
There is no driver installation for the iPad® necessary. Simply connect the LR-16 to your iPad®
by connecting the supplied USB cable to the LR-16 USB2.0 connector on the rear panel and the
iPad® using the appropriate Apple USB adapter.
The LR-16 can now be used as a 16-inout, 2-output audio interface with the iPad® and appropriate
multi-channel iOS recording software.