Specifications

8
6.7 RS-232 and Telnet Commands
Command Description
A1~A8 Switch Output A to 1~8
B1~B8 Switch Output B to 1~8
C1~C8 Switch Output C to 1~8
D1~D8 Switch Output D to 1~8
E1~E8 Switch Output E to 1~8
F1~F8 Switch Output F to 1~8
G1~G8 Switch Output G to 1~8
H1~H8 Switch Output H to 1~8
ABCE…1~ABCD…8 Switch Output ABCD… to 1~8 at the
same time
SETIP <IP><SubNet><GW> Setting IP. SubNet.GateWay<Static IP>
RSTIP IP conguration was reset to factory
defaults<DHCP>
IPCONFIG Display the current IP cong
P0
Power Off
P1
Power On
I1~I8 Switch all the output to 1~8
ST Display the current matrix state and
rmware version
RS System Reset to H8
EM Setting EDID MODE. 1-STD 2-TV.
? Display all available commands
QUIT Exit (Telnet only)
Note: Any commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.