Specifications
Page 4
• CEC and EDID repeater functionalities cannot be supported.
• Multicast mode is not HDCP compliant.
4. IR sensor.
5. Power LED: The LED will illuminate when power is ON.
6. Link LED: The LED ashes quickly during initial link procedure, ashes
slowly during signal conrmation & remains solid when the link is
established.
7. Input indicator LED: The relevant LED will illuminate to indicate which
input source is currently selected and being routed to the HDMI display.
4.1.2 Rear Panel
1 2
HDMI3
HDMI2
HDMI1
DC 5V
1. HDMI 1/2/3 Inputs: Connect each input to the HDMI output of your source
equipment such as a DVD player or set-top-box.
2. Power: Plug the 5V DC power supply into this unit and connect the adaptor to an
AC wall outlet.