a b c d e f g h i 1) -27 Balance OUT IN MCBUS PRE OUT 1 PRE OUT 2 ZONE 2 OUT HEADPHONE MADE IN ENGLAND 1* IN-6 IN-5 IN-4 IN-3 IN-2 IN-1 USE PSX-R ONLY IN-7 IN-8 IN-9 IN-10 IN-11 1& 1^ 1% 1$ 1# 1@ 1! Fig 3 Fig 1 MC-BUS Cyrus amplifier MC-BUS out MC-BUS in Cyrus CD player ab c d e MC-BUS out MC-BUS in -27 CD Sample rate 44.
Pre-amplifier L L PRE 1 PRE 2 R TP OUT TP2 IN L TP1 IN R AU2 AU1 AV TU CD R Power amplifier 1 Right treble - - + + + + - Left treble - Right bass Left bass Power amplifier 2 Connecting a bi-amplified speaker system to a pre-amplifier Fig 5
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions IMPORTANT! Read before operating this equipment! NAKED FLAMES: No naked flame sources, such as candles, must be placed on this product. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions Welcome to the world of Cyrus! INSTALLATION (Refer to Fig 1): Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art design technology and outstanding quality of manufacture has won countless awards around the world. We are confident that you will derive great pleasure from owning a product from one of the most recognised and respected manufacturers of hi-fi equipment. Now is a good time to register your new Cyrus product.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions Digital Audio Inputs Connecting a Tape/Disc recorder for recording Connecting digital audio sources The digital audio inputs are compatible with a number of different digital audio sources.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions Connecting a Cyrus Surround Sound decoder If your system includes a Cyrus multi-channel surround sound decoder, it may be connected through your stereo amplifier to share the main front speakers of your system. In this case, connect a stereo phono interconnect from the front channel outputs of the surround decoder to one of the Analogue Inputs of the amplifier.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions Input names When your amplifier left the factory, the input names are set as shown below CONFIGURATION Through the setup menu you can customise your amplifier to best match your system. Input 1 – CD Input 5 – Input 5 Input 9 – Input 9 Input 2 – Tuner Input 6 – Tape Input 10 – Input 10 Input 3 – Cyrus AV Input 7 – Input 7 Input 11 – Input 11 Input 4 – Input 4 Input 8 – Input 8 The name of any input may be changed to a choice from the following list.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions OPERATION (Refer to fig 2) Mute Key to the front panel drawing: 1. 2. 3. 4. 5. Standby Switch Standby Light Remote Eye Display Window Level control and setup adjust 6. 7. 8. 9. 10. Pressing the MUTE Key i will mute the volume to minimum level without disturbing the existing volume setting. When muted the display will show that the volume is muted. Press the MUTE key again or move the volume knob up to fade back up to the original volume setting.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions OPERATION WITH THE AVRS7.2 REMOTE CONTROL Your amplifier is supplied with the Cyrus AVRS7.2 remote control which will also control Cyrus CD players, DVD players, tuners and surround sound decoders. System select keys Commands may be sent to different Cyrus system components by selecting the appropriate system select key on the handset. These keys are marked CD, TU/DAB, AV, AV-S and AV SETUP.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions CD MODE 1 2 Amplifier, CD, DAB and FM tuner commands 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 DAB MODE TU MODE (FM) Power off all systems CD, DAB, TU or AV COMMAND MODE SELECT Amplifier, CD, DAB, FM tuner, DVD power on Amplifier input select AV SURROUND COMMAND MODE SELECT – see table overleaf Stereo amp/preamp input select Stereo amp/preamp balance select Stereo amp/preamp volume control Stereo amp/preamp mute Select station
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions TROUBLESHOOTING GUIDE WARRANTY If your amplifier is not operating properly, disconnect the power and check carefully all connections. If you are in any doubt, consult your retailer. The warranty should be registered on-line within 8 days of purchase. No Dealer or Distributor may vary the terms of this warranty, which is personal to the original Purchaser and is not transferable.
Cyrus Pre XPd, Cyrus Pre XPd Qx User Instructions SPECIFICATIONS Remote command specification Power Supply Voltage: .......................................................................As plate on rear of unit Power Consumption Standby ....................................................................................................<1W Maximum ......................................................... ........................................
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K.